Home > ATAG > ATAG DW7214MC Dishwasher

ATAG DW7214MC Dishwasher

Before washing for the first time  
Top up rinse aid  
Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 1 - 5.  
Lift up to open  
Press to close  
1. Open the rinse aid compartment lid.  
2. Carefully top up with rinse aid to the level marked MAX.  
3. Wipe up any splashes of rinse aid around the compartment.  
4. Close the lid firmly.  
When the rinse aid needs topping up, the symbol lights on the display.  
Top up salt  
For a water supply with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt.  
Add salt to the salt compartment if you have selected Water hardness 1 - 9.  
1. Remove the salt compartment lid by turning it anticlockwise.  
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. Before  
washing for the first time, pour in about 1 l of water. (Water is only needed the first time.)  
3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.  
4. Wipe up any excess salt so that the lid can be screwed on firmly.  
When the salt needs topping up, the symbol lights on the display.  
WARNING!  
In order to avoid rust stains a dishwashing program must be started immediately after adding  
salt.  
Never pour dishwasher detergent into the salt compartment. This destroys the water softener!  
9
GeneralDetails
NameATAG DW7214MC Dishwasher
MakeATAG
LanguageEnglish
FiletypePDF (Download)
File size1.96 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ATAG VA7214LR 60 cm Dishwasher
ATAG VA7214LR 60 cm Dishwasher
ATAG VA8214LU Dishwasher
ATAG VA8214LU Dishwasher
ATAG VA7213SMN Dishwasher
ATAG VA7213SMN Dishwasher

ATAG DW7214MC Dishwasher