Bauknecht BK6UC11BS7A0X Dishwasher

1

2

3

4

5

6

7

8

Quick Guide  

EN  

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.  

PLEASE SCAN THE  

QR CODE ON YOUR  

APPLIANCE IN  

ORDER TO HAVE  

MORE DETAILED  

INFORMATION  

In order to receive a more complete assistance, please  

register your appliance on: www.bauknecht.eu/register  

Before using the appliance carefully read Safety and Installation Instructions.  

After installation, please remember to remove all transport protection parts from  

the dishwasher.  

CONTROL PANEL  

1. On-Off / Reset button with indicator light  

2. Program selection button with indicator light  

3. Multizone button with indicator light / Keylock  

4. Eco program indicator light  

5. Keylock indicator light  

6. Display  

1

2

3

4 5  

6

7

8

9

10 11  

12  

13  

14  

7. Program number and remaining time indicator  

8. Tablet (Tab) indicator light  

9. Closed water tap indicator light  

10. Rinse Aid refill indicator light  

11. Salt refill indicator light  

12. Power Clean® button with indicator light / Tablet (Tab  

13. Delay button with indicator light  

14. Start/Pause button with indicator light / Drain out  

More information in the Daily Reference Guide on website.  

FIRST TIME USE  

This system regenerates itself with salt, therefore it is required to refill  

salt container when empty.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

FILLING THE SALT RESERVOIR  

The use of salt prevents the formation of LIMESCALE on the dishes and on  

the machine’s functional components.  

•

•

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher and must be  

filled when the SALT REFILL indicator light in the control panel is lit.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Only the first time you do this: fill the salt reservoir  

with water.  

3. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid  

dispenser A should be filled when the RINSE AID  

REFILL indicator light in the control panel is lit.  

NEVER pour the rinse aid directly into the appli-  

ance tub.  

D

C

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water sof-  

tener beyond repair).  

Whenever you need to add salt, it is mandatory to complete the pro-  

cedure before the beginning of the washing cycle to avoid corrosion.  

A

FILLING THE DETERGENT DISPENSER  

To open the detergent dispenser use the opening device C. Introduce the  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub. If all-in-one detergents are used, we  

recommend using the TABLET button, because it adjusts the program so  

that the best washing and drying results are always achieved.  

Usage of detergent not designed for dishwashers may cause malfunc-  

tion or damage to the appliance.  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently prevent-  

ing scale buildup on heater, contributing also to better cleaning efficiency.  

PROGRAMS TABLE  

Duration  

of wash  

program  

(h:min)^**)  

Energy  

consump-  

tion  

Water con-  

sumption  

(litres/cycle)  

Available  

options ^*)  

Programs description  

(kWh/cycle)  

Eco 50°- Program is suitable to clean normally soiled tableware, that for  

this use, it is the most efficient programme in terms of its combined en-  

ergy and water consumption, and that it is used to assess compliance  

1.  

3:35  

8.7  

0.63  

with the EU Ecodesign legislation.  

Intensive 65° - Program recommended for heavily soiled crockery, espe-  

2.  

2:45  

1:20 - 3:00  

1:25  

17.5  

7.0 - 14.0  

11.5  

1.60  

0.70 - 1.10  

1.10  

cially suitable for pans and saucepans.  

Sensor 50-60°- For normally soiled dishes with dried food residues. Sens-  

es the level of soiling on the dishes and adjusts the program accordingly.  

3.  

Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that ensu-  

res optimal cleaning and drying performance in shorter time.  

4.  

Glass 45° - Program for delicate items, which are more sensitive to high  

temperatures, for example glasses and cups.  

5.  

1:40  

12.0  

1.20  

Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes  

6.  

0:30  

9.0  

0.50  

-

-

with no dried food residues. Without drying.  

Silent 50° - Suitable for night-time operation of the appliance. With the  

lowest noise.  

7.  

3:30  

16.0  

1.15  

Hygiene 65° - Normally or heavily soiled crockery, with additional anti-  

bacterial wash. Can be used to perform maintenance of the dishwasher.  

8.  

1:50  

12.0  

1.30  

-

-

Prewash - Use to refresh crockery planned to be washed later.  

No detergent to be used with this program.  

9.  

0:10  

4.5  

0.01  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Bauknecht BK6UC11BS7A0X Dishwasher
Make	Bauknecht
Language	English
Filetype	PDF (Download)
File size	5.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bauknecht

Bauknecht BK6UC11BS7A0X Dishwasher Overview

Summary of Contents

• Page 1: Quick guide Thank you for buying a Bauknecht product. Please scan the QR code on your appliance in order to have more detailed information. Before using the appliance carefully read safety and installation instructions. After installation, please remember to remove all transport protection parts from the dishwasher. Control panel includes various buttons and indicator lights for operation. First time use requires refilling the salt container when empty. The use of salt prevents the formation of limescale on the dishes and on the machine’s functional components. Rinse aid makes dish drying easier and should be filled when the rinse aid refill indicator light is lit. To open the detergent dispenser, use the opening device and introduce the detergent into the dry dispenser only. Water softener automatically reduces water hardness, preventing scale buildup and contributing to better cleaning efficiency.
• Page 2: ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Pre-treatment of the dishes is not needed before any of the programs. Not all options can be used simultaneously. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The DELAY function cannot be set once a wash cycle has been started. ActiveDry is a convection drying system which automatically opens the door during/after drying phase to ensure exceptional drying performance every day. POWER CLEAN® provides a more intensive and powerful wash in the lower rack, in the specific area. The upper rack has tip-up supports which can be used in a vertical position when arranging tea/dessert saucers or in a lower position to load bowls and food containers. The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position to load pans and salad bowls easily. To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.
• Page 3: Quick guide Please scan the QR code on your product for more detailed information. Troubleshooting In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific regulation requirements. No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running. The dishwasher does not fill the water. Display shows: F6, both On/Off and START/Pause LEDs are blinking rapidly. The sieve in the water inlet hose is clogged; it is necessary to clean it. Dishwasher finishes the cycle prematurely. Display shows: F15 and both On/Off and START/Pause LEDs are blinking rapidly. Check if end of drain hose is placed at correct height. Check for siphoning into home sewage system, install air admittance valve if necessary. Air in water supply. Check water supply for leaks or other issues letting air inside. Detergent leaks can be avoided by changing liquid detergent type or using tablets. When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
• Page 4: Danke, dass Sie sich für ein Bauknecht Produkt entschieden haben. Lesen Sie vor Gebrauch des Geräts die Sicherheitshinweise aufmerksam durch. Denken Sie nach der Installation daran, sämtliche Teile zum Transportschutz aus dem Geschirrspüler zu entfernen. Der Salzbehälter darf nie leer sein. Es ist wichtig, die Wasserhärte einzustellen. Klarspüler macht das Trocknen von Geschirr einfacher. Die Verwendung von Reinigungsmitteln, die nicht für Geschirrspüler bestimmt sind, kann zu Fehlfunktionen oder Schäden am Gerät führen. Der Wasserenthärter reduziert automatisch die Wasserhärte und trägt zu einer höheren Reinigungsleistung bei. Das Eco-Programm eignet sich, um normal verschmutztes Geschirr zu reinigen. Das Intensivprogramm wird für stark verschmutztes Geschirr empfohlen.
• Page 5: Kurzanleitung Hygiene - Normal oder stark verschmutztes Geschirr mit zusätzlichem antibakteriellen Spülgang. Vorwäsche - Verwendet, um Geschirr einzuweichen, das später gespült werden soll. Die ECO-Programmdaten sind Labormessdaten, die gemäß der europäischen Vorschrift EN 60436:2020 erfasst wurden. Eine Vorbehandlung des Geschirrs ist vor keinem Programm erforderlich. OPTIONEN kann direkt durch Drücken der entsprechenden Taste ausgewählt werden. MULTIZONE - Haben Sie nur wenig Geschirr zu spülen, wählen Sie den Spülgang Halbe Füllung. STARTZEITVORWAHL - Der Programmstart kann um eine Zeit von 0:30 bis 24 Stunden verzögert werden. ActiveDry - Heißlufttrocknungssystem, das die Tür während/nach der Trockenphase automatisch öffnet. POWER CLEAN® - Bietet einen intensiveren und stärkeren Spülvorgang mit zusätzlichen Powerdüsen. REINIGUNG UND WARTUNG - Reinigung der Filtereinheit und der Sprüharme.
• Page 6: Please scan the QR code on your product in order to have more detailed information. In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues, please contact authorized After-sales Service. Spare parts will be available for a period of either up to 7 or up to 10 years. Sicherstellen, dass Wasser im Wassernetz ist oder der Wasserhahn läuft. Sicherstellen, dass der Zulaufschlauch nicht geknickt ist. Kontrollieren Sie, ob das Ende des Abflussschlauches auf der korrekten Höhe positioniert ist. Kleine Leckagen führen nicht zu einer Funktionsstörung der Maschine. Das Auslaufen des Waschmittel kann vermieden werden, indem man den Typ des Flüssigwaschmittels wechselt oder Tabs verwendet. Die Modellinformation ist über den QR-Code auf der Energieverbrauchskennzeichnung aufrufbar.
• Page 7: Page 7
• Page 8: Page 8