Home > Beko > beko BDI1420 Dishwasher

beko BDI1420 Dishwasher

Installation  
Power cable plug must be within easy  
reach after installation.  
Aquasafe+  
(depends on model)  
The Aquasafe+ system protects against  
water leaks that may occur at the hose inlet.  
Water contact with the valve box of the  
system must be avoided to prevent damage  
to the electrical system. If the Aquasafe+  
system is damaged, unplug the product and  
call the Authorised Service Agent.  
Unplug the product after the  
washing programme is over.  
B
The voltage and allowed fuse or  
breaker protection are specified in the  
“Technical specifications” section. If the  
current value of the fuse or breaker in  
the house is less than 16 Amps, have  
a qualified electrician install a 16 Amp  
fuse.  
As the hose set contains  
electrical connections and  
A assemblies, never shorten  
The specified voltage must be equal to  
your mains voltage.  
Do not make connections via extension  
cables or multi-plugs.  
or lengthen the hose with  
extension hoses.  
Damaged power cables must  
be replaced by the Authorised  
B Service Agent.  
If your dishwasher is equipped  
with internal illumination, lamp  
B should only be replaced by the  
Authorised Service Agent in case  
of failures that may occur on the  
lamp.  
If the product has a failure, it  
should not be operated unless  
Bit is repaired by the Authorised  
Dishwashers door must be  
aligned properly otherwise hot  
A steam can escape! Danger of  
Service Agent! There is the risk  
of electric shock!  
serious burns, other injury or  
may damage furniture.  
Initial use  
Before starting to use the product, make  
sure that all preparations are made in  
accordance with the instructions in sections  
“Important safety instructions” and  
“Installation”.  
Electrical connection  
Connect the product to a grounded outlet  
protected by a fuse complying with the  
values in the “Technical specifications” table.  
The manufacturer shall not be liable for any  
damages that will arise when the product is  
used without grounding in accordance with  
the local regulations.  
To prepare the product to do the  
dishes, perform first operation in the  
shortest programme with detergent  
while the machine is empty.  
Connection must comply with national  
regulations.  
12 /41 EN  
/
GeneralDetails
Namebeko BDI1420 Dishwasher
MakeBeko
LanguageEnglish
FiletypePDF (Download)
File size4.88 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
beko DUT25401WHW Front Pocket Handle Dishwasher
beko DUT25401WHW Front Pocket Handle Dishwasher
beko BDIN38522Q Dishwasher
beko BDIN38522Q Dishwasher
beko BDFN26450A Dishwasher
beko BDFN26450A Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFN26521XQ Dishwasher
beko BDFN26521XQ Dishwasher
NMG0724BEKODI Dishwasher
NMG0724BEKODI Dishwasher
beko 943711 Dishwasher
beko 943711 Dishwasher
beko DIN15210 Full-Size Dishwasher
beko DIN15210 Full-Size Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko BDIN38650C Dishwasher
beko BDIN38650C Dishwasher

beko BDI1420 Dishwasher