Home > Bellini > Bellini BDW504 Series 45cm and Dishwasher

Bellini BDW504 Series 45cm and Dishwasher

Connection Of Drain Hoses  
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run  
into the sink, making sure to avoid bending or crimping it. The height of drain pipe  
must be less than 1000mm. The free end of the hose must not be immersed in water  
to avoid the back flow of it.  
To allow water to flow out of the drain hose and into the under sink waste pipe  
ensure that the ‘spigot connection’ is open if not it ‘drilled out internally’.  
Please securely fix the drain hose in either position A or position B  
Counter  
Back of dishwasher  
A
Drain hose  
B
Water Inlet  
Drain Pipe  
Mains Cable  
How to drain excess water from hoses  
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained  
directly into the sink. It will be necessary to drain excess water from hoses into a bowl  
or suitable container that is held outside and lower than the sink.  
Water outlet  
Connect the water drain hose. The drain hose must be correctly fitted to avoid water  
leaks. Ensure that the water drain hose is not kinked or squashed.  
Extension hose  
If you need a drain hose extension, make sure to use a similar drain hose.  
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher  
could be reduced.  
Syphon connection  
The waste connection must be at a height less than 100 cm (maximum) from the  
bottom of the dish. The water drain hose should be fixed .  
17  
GeneralDetails
NameBellini BDW504 Series 45cm and Dishwasher
MakeBellini
LanguageEnglish
FiletypePDF (Download)
File size2.76 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
bellini BDW96W, BDW96X Series 45cm Dishwasher
bellini BDW96W, BDW96X Series 45cm Dishwasher
Bellini BDWM48B Dishwasher
Bellini BDWM48B Dishwasher

Bellini BDW504 Series 45cm and Dishwasher