Home > Bellini > Bellini BDW504 Series 45cm and Dishwasher

Bellini BDW504 Series 45cm and Dishwasher

NOTE:  
*AS/NZS 2007.1: This program is the test cycle. The information for comparability  
test in accordance with *AS/NZS 2007.1.  
Starting A Cycle Wash  
1. Draw out the lower and upper basket, load the dishes and push them back.  
It is commended to load the lower basket first, then the upper one.  
2. Pour in the detergent.  
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.  
Make sure that the water supply is turned on to full pressure.  
4. Close the door, press the Power button, to switch on the machine.  
5. Choose a program, the response light will turn on. Then press the Start/Pause  
button, the dishwasher will start its cycle.  
Changing The Program Mid-cycle  
A wash cycle can only be changed if it has been running for a short time otherwise,  
the detergent may have already been released and the dishwasher may have already  
drained the wash water. If this is the case, the dishwasher needs to be reset and the  
detergent dispenser must be refilled. To reset the dishwasher, follow the  
instructions below:  
1. Press the Start/Pause button to pause the washing.  
2. Press program button for more than 3 seconds - the program will cancel.  
3. Press the program button to select the desired program.  
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.  
3 sec  
13  
GeneralDetails
NameBellini BDW504 Series 45cm and Dishwasher
MakeBellini
LanguageEnglish
FiletypePDF (Download)
File size2.76 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
bellini BDW96W, BDW96X Series 45cm Dishwasher
bellini BDW96W, BDW96X Series 45cm Dishwasher
Bellini BDWM48B Dishwasher
Bellini BDWM48B Dishwasher

Bellini BDW504 Series 45cm and Dishwasher