BOSCH 300 Series Recessed Handle Dishwasher
FAQs
Tips
MAINTENANCE
Q: Why is food remaining on dishes after I run the cycle?
A: It is possible the dishes do not have adequate clearance between them.
Also, be sure nothing is blocking spray arm and that the filter is clean. Select an
intensive cleaning cycle.
Clean surfaces with damp cloth and mild
soap.
Q: Why does the cycle run a long time?
NOTICE: Do not use abrasives or bleach
based cleaners. Do not use stainless steel
cleaner on black stainless or anti-finger print
surfaces.
A: Sensors in the dishwasher automatically increase the cycle time to ensure a
good wash when heavy soil is detected.
Cleaning filter
A: Incoming water may not be hot enough and dishwasher has to heat it.
Clean the filter 3-12 times a year, depending
on usage.
ADJUSTING THE SETTINGS
Tip: The simplest way to change the settings is with the Home ConnectTM app.
It is also recommended to run Machine
Care program to keep the tub clean. It is
accessible through the Home Connect app.
First Steps to adjust any setting:
Open the door and press the ON/OFF button.
Hold down Button A for 3 seconds, until the Rinse Aid indicator light flashes.
Release button, then follow steps below to adjust specific setting.
Cleaning spray arm
FOR BEST RESULTS
To adjust the rinse aid:
1. Press the Start button repeatedly until the right amount of rinse aid has
been set. 0 (off), 1(low), 2(medium), or 3(high) LEDs above cycle buttons
will light up accordingly.
1
2
2. Press A button for 3 seconds to save the setting.
Use rinse aid
for better
drying.
Scrape off
food,
To turn on intensive drying:
1. Press button A until the Clean and Sanitize lights flash.
2. Press the Start button until 1 LED light above the heavy cycle button is on
(intensive dry is on).
but do not
rinse.
3. Press button A for 3 seconds to save the setting.
3
rack as needed
for large items.
To adjust the signal volume:
1. Press button A until the Clean and Rinse Aid lights flash.
2. Press the Start button repeatedly until the preferred volume level has been
selected. 0 (off), 1(low), 2(medium), or 3(high) LEDs above cycle buttons
will light up accordingly.
Adjust upper
PUSH
3. Press button A for 3 seconds to save the setting.
Download the Home ConnectTM app to access the full Use and Care Manual or
Type in the Model Number which can be found inside the dishwasher door:
To reset to factory settings:
1. Press button A until the Clean, Sanitize and Rinse Aid lights flash.
2. Press the Start button. The 3 LEDs above cycle buttons will blink alterna-
tively for 1 minute. The factory settings have been restored.
8
9
| General | Details |
|---|---|
| Name | BOSCH 300 Series Recessed Handle Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.91 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HCX48E Dishwasher
SIEMENS SX95Z802CE XXL iQ500 Dishwasher
MONOGRAM CDT845P4NW2 Interior Dishwasher
Gaggenau 9001923390_A Free Standing Dishwasher
BOSCH SMS4EMI06E Free Standing Dishwasher
BOSH SX73HX42VE Dishwasher
FISHER AND PAYKEL DD24STX6PX1 11 Dishwasher
Hotpoint A1385707 Dishwasher
FORTE F24DWS450PR Dishwasher
BOSCH SMS2HKI03E-30 Dishwasher
FISHER and PAYKEL DD24DT2NX9 Dishwasher