LG LDPS6762D PrintProof Black Smart Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

us_main.book.book Page 9 Tuesday, July 5, 2022 1:32 PM  

INSTALLATION  

9

INSTALLATION  

Before Installing  

Online Installation Guide  

This QR code is for reference only, for complete  

installation instructions, see the owner's manual  

supplied with each dishwasher.  

d

e

h

f

i

English  

g

a Electrical Cable  

b Water Supply Tube  

c Fittings for Tube  

d Coupler  

https://www.lg.com/us/support/video-tutorials/lg-  

dishwasher-installation-CT10000009-  

1366643457088  

e Electrical Tape  

f Air Gap  

French  

g Wire Nuts for 16-Gauge Wiring  

h Hose Clamp  

i UL Approved Strain Relief  

Tools Needed  

https://www.lg.com/ca_fr/soutien/aide-produit/  

CT20100059-20152463332979  

WARNING  

• DISCLAIMER - This Guide is strictly confidential  

and shall not be copied, disclosed, distributed,  

disseminated, publicized or reproduced, in  

whole or in part, without the prior written  

authorization of LG Electronics.  

a

b

c

The Guide may contain inaccuracies and/or  

typographical errors and may be changed or  

updated at any time by LGE without notice.  

d

g

j

m

e

h

k

n

f

i

l

o

Parts not Provided  

a

b

c

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	LG LDPS6762D PrintProof Black Smart Dishwasher
Make	LG
Language	English
Filetype	PDF (Download)
File size	2.74 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• LG

LG LDPS6762D PrintProof Black Smart Dishwasher Overview

Summary of Contents

• Page 1: Installation Before installing Online installation guide This QR code is for reference only, for complete installation instructions, see the owner's manual supplied with each dishwasher. Tools needed Warning This guide is strictly confidential and shall not be copied, disclosed, distributed, disseminated, publicized or reproduced, in whole or in part, without the prior written authorization of LG Electronics. The guide may contain inaccuracies and/or typographical errors and may be changed or updated at any time by LGE without notice. Parts not provided
• Page 2: INSTALLATION Product dimensions Installation overview Please read the following installation instructions first after purchasing this dishwasher or transporting it to another location. Preparing cabinet opening This dishwasher is designed to fit a standard dishwasher opening. An opening may be needed on both sides to route plumbing and electrical connections. To ensure proper drainage, install the dishwasher no more than 12 ft. (3.65 m) from the sink. The location must have sufficient space for the dishwasher door to open easily.
• Page 3: Installation Leave at least 0.1” (2 mm) between the dishwasher and the cabinet sides. Installation damage is not covered by the warranty, and leaks caused by improper installation may result in property damage. If installing the dishwasher in a corner, leave a minimum of 2” (50 mm) between the dishwasher and the adjacent wall. Do not use existing holes unless they are in the target area. The adjacent wall must be free of obstructions. Select a location as close to the sink as possible for easy connections to water supply line, drain hose, and electrical connection. Do not reuse an old hose. Use only a new hose when installing the dishwasher. Use a time-delay fuse or circuit breaker for electrical connections. The wiring must be grounded properly. If in doubt, have it checked by a qualified electrician. Do not use an extension cable or adapter with this dishwasher.
• Page 4: INSTALLATION Run the electrical cable along the floor 14 – 16 (356 mm – 406 mm) from the water supply line and tape it in place. It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician. The electrical outlet must be within 4 ft. (1.22 m) of either side of the dishwasher. The best location for the electrical conduit is on the right side of the back wall. When connecting the dishwasher water supply line to the house water supply, sealing tape or compound should be used on pipe threads to avoid leaks. Connect the dishwasher to a hot water supply with a temperature range between 120 °F (49 °C) and 149 °F (65 °C). Water supply pressure must be between 20 psi and 80 psi (140–550 kPa). Do not remove safety cover. Removal can result in fire, electric shock or death. There are 2 channels in the bottom of the dishwasher for routing the water and electrical connections. Turn off the house water supply and the circuit breaker or dedicated power before connecting the dishwasher.
• Page 5: Installation The rear shipping brace can be removed if additional clearance is needed when installing the dishwasher under a low countertop. Remove all packing materials from the interior of the dishwasher before installing the appliance. For countertops made of wood or other materials that will not be damaged by drilling, use the metal installation brackets provided. If you lay the dishwasher on its back, do so carefully to avoid damaging the drain hose and the tub. For countertops made of granite, marble, or other materials that could be damaged by drilling, use the wood screws to attach the dishwasher to the cabinet. Installation brackets and screws can be found in the silverware basket. Insert the tabbed end of the installation brackets into the slots in the upper frame. Remove the lower cover. If there is insulation padding behind the lower cover, remove it. Bend the tabs on the brackets to secure them to the frame using a pair of needle nose pliers.
• Page 6: Installation Open the door and grab the body frame and the top front opening of the tub to move or lift the dishwasher. Align the dishwasher with the opening, ensuring the water supply line and electrical cable are positioned correctly. Do not pull or lift the dishwasher using the handle, as it can damage the door and hinges. Avoid pushing the door of the dishwasher with knees when sliding it into position to prevent damage to the front cover. Smooth out or pad the edges of the hole drilled for the water supply to avoid damaging the drain hose. Ensure the drain hose is straight before feeding it through the hole for the water supply. As you slide the dishwasher into the opening, slowly pull on the drain hose from inside the cabinet to take up slack. Be careful not to kink, pinch, crush, or stress the drain hose during installation to avoid leaking and water damage. Do not push the top of the dishwasher, as it can damage the interior.
• Page 7: Installation Gradually slide the dishwasher into the opening, making sure that the water supply line and electrical cable are passing freely through the channels. Connecting water supply line and power With the home water supply turned off, connect the water supply line to the inlet valve on the left front of the dishwasher. To avoid malfunctions or leakage, it is important that the drain hose not get kinked, pinched, stressed or crushed. Damage resulting from improper installation is not covered under the warranty. Tape or compound should not be used on dishwasher inlet valve. As you slide the dishwasher into the opening, stop periodically to take up the slack by pulling the drain hose farther into the cabinet. Tighten the compression nut. The dishwasher should have a dedicated properly grounded branch circuit to connect the 3 wire setup which includes the ground wire. If a 3-prong power supply is used, it should be in an accessible location adjacent to the dishwasher within 4 ft. of the dishwasher side.
• Page 8: Installation The best location for the electrical conduit is on the right side of the back wall. Turn off electrical power to the unit at the circuit breaker. Insert the electrical cable through the hole in the strain relief. Use a Phillips screwdriver to remove the screw from the junction box cover and remove the cover. Pull the existing wires through the openings in the junction box. Remove the junction box from the appliance. Pair the white, black, and green wires to the matching colored wires from the dishwasher. Twist on the provided wire nuts tightly to connect the corresponding wires. Insert a strain relief through the hole in the junction box. Tighten the ring nut to secure it in place.
• Page 9: Installation Wrap electrical tape around each connection. Do not connect drain hoses from other appliances to the dishwasher’s drain hose. If an extension drain hose is required, use a 5/8 or 7/8 inside diameter, 2-3 ft. length hose and a coupler for connecting the two hose ends. The height of the drain hose end must be at least 12 (305 mm) and within 40 (1016 mm) from the base of the dishwasher to avoid water being siphoned from the tub. Verify that the black wire is hot (120 V). If not, or if you are unsure of the power supply, have it checked by a licensed electrician. Do not leave stripped wire exposed. Trim stripped wire to fit completely inside wire nuts. If the end of the drain hose does not fit the drain line, use a heat and detergent resistant adapter. For drain hose installation, use the screw style hose clamp provided with this dishwasher in the silverware basket. If the knockout plug has not been removed, the dishwasher will not be able to drain properly. Follow local codes and ordinances. Do not exceed 12 ft. (3.65 m) distance to drain.
• Page 10: Installation Connecting to disposal or waste Attach the drain hose to the disposal with the hose clamp provided. Remove the knockout plug with a hammer and screwdriver. Connect the end of the drain hose to the air gap with the hose clamp provided. This avoids water being siphoned from the tub. The height of the drain hose end must be at least 12” (305 mm) and within 40” (1016 mm) from the base of the dishwasher. If it is not connected, attach the rubber hose connector to the disposal or waste tee with a hose clamp. If the knockout plug has not been removed, the dishwasher will not be able to drain properly. Check that the dishwasher is level and adjust the leveling feet if necessary. Failure to level the dishwasher may result in leakage, problems closing the door, or noise.
• Page 11: Installation Turn the front leveling feet clockwise to raise the front of the tub and counterclockwise to lower it. To check that the tub is level from front to back, remove the lower rack and pour 169 oz. (5 L) of water into the bottom of the tub. The adjustments work identically for both front leveling feet. When a flat-blade screwdriver is unavailable, use a 1/4 square drive wrench or 3/8 square drive wrench with 1/2 socket to turn the front leveling feet. With the lower rack removed, place a level on the inside wall of the tub to check that the dishwasher is level from side to side. Use a Phillips screwdriver to adjust the rear leveling foot and the rear of the tub using the center screw at the base of the appliance in the front. Turn the center screw clockwise to raise the rear of the tub and counterclockwise to lower it. Adjust as needed until the dishwasher is completely leveled. To avoid damaging the screw, do not use an electric screwdriver. Adjust the front and rear leveling feet until they are all in firm contact with the floor.
• Page 12: Installation Secure the dishwasher to the countertop with the provided brackets if the countertop can be drilled into. If the countertop cannot be drilled into, secure the dishwasher to the cabinet frame with the provided wood screws. Ensure the dishwasher is level and all leveling feet are in firm contact with the floor before attaching it. If the dishwasher is not leveled properly, the door may not close properly or water may leak. Installation brackets and screws can be found in the silverware basket. Turn on the circuit breaker and the house water supply. Make sure that the door opens and closes smoothly. Use the bracket screws provided to secure the brackets at the top of the dishwasher. Check for leaks at the drain hose and water supply connection. Power on the dishwasher and run a Turbo cycle to verify proper operation.
• Page 13: Installation If a water leak is detected, press and hold the Start button for 3 seconds to cancel the wash cycle and automatically drain the water from the dishwasher. Tighten all water connections and run another cycle. Repeat until no leaks are detected. Error Code IE Possible cause: Water supply line is kinked under dishwasher. Feed the drain and water supply hoses through the hole under the sink. House water supply is not turned on. Only install the lower cover provided with the dishwasher. Turn the water faucet on. Error Code OE Possible cause: Drain hose is kinked or pinched. Drain hose is connected to the disposal without removing the knockout plug. Waste tee or disposal is clogged.