BOSCH SHV53CM3N 300 Series Full Dishwasher
en-usꢀDishwasher Connection
3. If your model has a rubber apron, tuck it behind the tabs
2. Attach using 2 of the included 3/4" (19mm) screws.
on the metal brackets as shown.
‒ Use only the included screws to avoid damaging the
dishwasher.
4. Slide toe panel into position ensuring the bottom of the
toe panel is flush with the floor.
5. Use the 9/16" (14mm) toe panel screws to mount the
toe panel through the hole it matches up with on the
metal brackets.
3. Slide the slotted toe panel into position ensuring that the
bottom of the toe panel is flush with the floor.
4. Screw the slotted toe panel into place with the
remaining 3/4"(19mm) screws.
The toe panel height can be adjusted by screwing into a
different hole in the bracket.
D
h
6. If your model has a rubber apron, open the door to
make sure that the apron is in the correct position.
Ensure the apron does not bind up and can freely move
up and down behind the toe panel.
5ꢀDishwasher Connection
Follow these instructions to connect the dishwasher.
D
h
5.1ꢀInstalling the Water Inlet Connection
4.12ꢀAttach Plastic Toe Panel
The hot water heater should be set to deliver
approximately 120° F (49° C) water to the dishwasher.
Water that is too hot can cause some detergents to lose
If your dishwasher came with a plastic toe panel and
slotted toe panel, follow these instructions.
1. Align the plastic toe panel on the base of the
dishwasher so the holes lines up.
14
| General | Details |
|---|---|
| Name | BOSCH SHV53CM3N 300 Series Full Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.33 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher

































































