Home > Bosch > BOSCH SMS6EDI63E Dishwasher

BOSCH SMS6EDI63E Dishwasher

enꢀWater softening system  
Switching off the water  
softening system  
Regeneration of the water  
softening system  
If you find the special salt refill indic-  
ator irritating, e.g. when using com-  
bined detergents with salt replace-  
ment substances, you can switch the  
indicator off.  
In order to obtain fault-free function of  
the water softening system, the appli-  
ance performs regeneration of the  
water softening system at regular in-  
tervals.  
Regeneration of the water softening  
system takes place before the end of  
the main rinse cycle in all pro-  
grammes. It will increase the run time  
and consumption values, e.g. water  
and electricity.  
Note  
To avoid damage to the appliance, only  
switch off the water softening system in  
the following cases:  
¡ The water hardness is max. 26 °E  
and you are using combined deter-  
gents with salt replacement sub-  
stances. According to manufactur-  
ers, combined detergents with salt  
replacement substances can gen-  
erally only be used up to a water  
hardness of 26 °E without adding  
special salt.  
Overview of consumption values  
with regeneration the water  
softening system  
Here you can find an overview of the  
maximum additional run time and  
consumption values during regenera-  
tion of the water softening system.  
¡ The water hardness is 0 - 8 °E.  
You do not need to use special  
salt.  
Regeneration of the water softening 6  
system after x rinse cycles  
1. Press .  
Additional run time in minutes  
Additional water consumption in  
litres  
7
5
2. To open the basic settings, press  
for 3 seconds.  
a The display shows H:xx.  
Additional power consumption in  
kWh  
0.05  
a The display shows  
.
3. Press  
or  
repeatedly until the  
display shows H:00.  
The consumption values specified  
are laboratory measurements determ-  
ined in accordance with the currently  
applicable standard and using the  
Eco 50° programme and the factory  
value of the water hardness is set to  
16 - 20°E.  
4. To save the settings, press  
for 3 seconds.  
a The water softening system is  
switched off and the salt refill indic-  
ator is deactivated.  
28  
   
GeneralDetails
NameBOSCH SMS6EDI63E Dishwasher
MakeBosch
LanguageEnglish
FiletypePDF (Download)
File size2.06 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SMV4HCX48E Dishwasher

BOSCH SMS6EDI63E Dishwasher