BOSCH SMV25AX06E Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the water hardness values that can be  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

1. Press  

2. Press and hold and  

and flash.  

3. Release buttons.  

4. repeatedly until the required level  

has been set.  

.

Before using for the first time, make sure you read both the op- selected here.  

until  

erating and the installation instructions.  

A table of country-specific units can be found in the instruction  

manual.  

Hardness mmol/l  

range  

Level  

LED A  

LED B  

LED C  

0, 1, 2 or 3 LEDs will light up ac-  

cordingly.  

Soft  

Medium  

Hard  

0 - 1.1  

0

1

2

3

1.2 - 2.9  

3.0 - 3.7  

3.8 - 6.2  

5. Press  

to save the setting.  

a The LEDs go out.  

Program:  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

Hard  

3) Water [l]  

1) 2:15 - 2:15  

2) 1.450 - 1.450  

3) 15.0 - 15.0  

1) 1:35 - 2:40  

2) 0.950 - 1.550  

3) 9.0 - 19.0  

1) 3:30  

/

Intensive 70°  

Adding special salt  

/

Auto 45-65°  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

/

2) 0.923  

Eco 50°  

3) 9.5  

1) 1:00  

2) 1.300  

1 hr Programme  

3) 10.0  

4. Place the lid back on the dispenser and turn to  

close.  

1) 0:15  

/

2) 0.050  

PreRinse  

3) 4.0  

Adding rinse aid  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

aid  

and lift  

.

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 3 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMV25AX06E Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.43 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMV25AX06E Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting the water softening system is essential for optimal performance. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional functions selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. Before using for the first time, make sure you read both the operating and installation instructions. To avoid damage to the appliance, only add special salt to the dispenser just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Load the tableware and ensure it is suitable for dishwashers. To cancel the programme, press for approximately 3 seconds.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system. Clean the filter elements under running water. Re-assemble the filter system. Insert the filter system into the appliance and turn the coarse filter clockwise. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages under running water. Insert the lower spray arm. Insert the upper spray arm and screw it firmly in place. Troubleshooting Display for water supply lights up. Filters are soiled or blocked. Water tap is turned off. Wastewater hose is blocked or kinked. Select a more intensive washing programme. Add rinse aid. Use rust-resistant tableware. Check that the spray arms are not blocked and can rotate freely.