INDeSIT D2F HD624 A Dishwasher

1

2

3

4

5

6

7

8

Quick Guide  

EN  

THANK YOU FOR BUYING AN INDESIT PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.indesit.com/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions guide.  

CONTROL PANEL  

indicator light  

1. On-Off / Reset button with  

7. Tablet (Tab) indicator light  

8. Closed water tap indicator light  

2. Program selection button with 9. Rinse Aid refill indicator light  

indicator light  

3. Half Load button with indicator  

light / Tablet (Tab)  

4. Eco program indicator light  

5. Display  

10. Salt refill indicator light  

11. Push&GO button with indicator  

light  

12. Delay button with indicator  

light  

1

3

4

5

6

7

8

9

10 11  

12  

13  

2

6. Program number and remain-  

ing time indicator  

13. Start/Pause button with indica-  

tor light / Drain out  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the  

the machine’s functional components.  

It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher (see PRODUCT  

DESCRIPTION) and must be filled when the SALT REFILL indicator light  

in the control panel is lit.  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

The detergent dispenser automatically opens up at the right time  

according to the program. If all-in-one detergents are used, we recommend  

using the TABLET button, because it adjusts the program so that the best  

washing and drying results are always achieved.  

•

•

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Only the first time you do this: fill the salt reservoir  

with water.  

3. Position the funnel (see figure) and fill the salt reservo-  

ir right up to its edge (approximately 1 kg); it is not  

unusual for a little water to leak out.  

Usage of detergent not designed for dishwashers may cause malfunc-  

tion or damage to the appliance.  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning efficiency.  

This system regenerates itself with salt, therefore it is required to refill  

salt container when empty.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water so-  

ftener beyond repair).  

Whenever you need to add salt, it is mandatory to complete the  

procedure before the beginning of the washing cycle to avoid corrosion.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse  

aid dispenser A should be filled when the  

RINSE AID REFILL indicator light  

control panel is lit.  

in the  

D

C

NEVER pour the rinse aid directly into the  

appliance tub.  

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle) (kWh/cycle)  

Eco 50°- Eco program is suitable to clean normally soiled tableware,  

that for this use, it is the most efficient program in terms of its com-  

bined energy and water consumption, and that it is used to assess  

compliance with the EU Ecodesign legislation.  

1.  

2.  

3:35  

2:40  

9.5  

0.95  

1.60  

Intensive 65° - Program recommended for heavily soiled crocke-  

ry, especially suitable for pans and saucepans (not to be used for  

delicate items).  

18.0  

Mixed 55° - Mixed soil. For normally soiled dishes with dried food  

residues.  

3.  

4.  

2:15  

0:28  

16.0  

9.0  

1.40  

0.50  

Fast&Clean 28’ 50° - Program to be used for half load of lightly-so-  

iled dishes with no dried food residues. Does not have drying phase.  

-

Night 50°- Suitable for night-time operation of the appliance.  

Ensures optimal cleaning and drying performance with the lowest  

noise emission.  

5.  

3:35  

16.6  

1.30  

Extra Hygiene 65°- Normally or heavily soiled crockery, with ad-  

ditional antibacterial wash. Can be used to perform maintenance  

of the dishwasher.  

6.  

7.  

8.  

9.  

2:00  

0:12  

0:50  

1:30  

12.0  

4.7  

1.50  

0.01  

0.80  

1.30  

Prewash - Use to refresh crockery planned to be washed later. No  

detergent to be used with this program.  

-

-

Self Clean 65°- Program to be used to perform maintenance of the  

dishwasher, to be carried out only when the dishwasher is EMPTY  

using specific detergents designed for dishwasher maintenance.  

10.0  

11.5  

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning  

performance in a short time without the need to pre-treat dishes.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	INDeSIT D2F HD624 A Dishwasher
Make	INDESIT
Language	English
Filetype	PDF (Download)
File size	5.9 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• INDESIT

INDeSIT D2F HD624 A Dishwasher Overview

Summary of Contents

• Page 1: Quick guide Thank you for buying an Indesit product. Before using the appliance carefully read Safety Instructions guide. Control panel includes various indicator lights for functions such as On-Off, Program selection, and Rinse Aid refill. First time use involves filling the salt reservoir and detergent dispenser. The use of salt prevents the formation of limescale on the dishes and the machine’s functional components. Water softener automatically reduces water hardness, preventing scale buildup and contributing to better cleaning efficiency. Rinse aid makes dish drying easier and should be filled when the Rinse Aid refill indicator light is lit. Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption. Intensive program is recommended for heavily soiled crockery, especially suitable for pans and saucepans. Fast&Clean program is for half load of lightly-soiled dishes and does not have a drying phase.
• Page 2: ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Pre-treatment of the dishes is not needed before any of the programs. Not all options can be used simultaneously. The actual time may vary depending on many factors such as temperature and pressure of the incoming water. If there are not many dishes to be washed, a half loading may be used in order to save water, electricity and detergent. The start of the program may be delayed for a period of time between 0:30 and 24 hours. To stop and cancel the active cycle, the Drain Out function can be used. Push&Go button allows you direct access to the Push&Go program, a wash and dry cycle that ensures great cleaning performance in a short time. The cutlery basket should be positioned only at the front of the lower rack. To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.
• Page 3: Guía rápida Gracias por comprar un producto Indesit. Antes de usar el electrodoméstico, lea atentamente las instrucciones de seguridad. Panel de control incluye botones para encender, seleccionar programas, media carga, y más. El depósito de sal evita la formación de incrustaciones de cal en la vajilla. Es obligatorio que el depósito de sal no esté nunca vacío. El ablandador de agua reduce automáticamente la dureza del agua. El abrillantador facilita el secado de la vajilla. El dispensador de abrillantador debe rellenarse cuando el indicador luminoso esté encendido. El programa Eco es el más eficiente en términos de consumo combinado de energía y agua. El prelavado se utiliza para remojar la vajilla que planea lavar más tarde.
• Page 4: Los datos del programa ECO se miden bajo condiciones de laboratorio de conformidad con la Norma europea EN 60436:2020. No es necesario ningún tratamiento previo de la vajilla antes de ninguno de los programas. Los valores indicados para los programas distintos al programa Eco son indicativos. El tiempo real puede variar dependiendo de muchos factores. La calibración del sensor puede incrementar la duración del programa hasta 20 min. Las opciones se pueden seleccionar directamente pulsando el botón correspondiente. Si no hay que lavar mucha vajilla, se puede utilizar un ciclo de media carga para ahorrar agua, electricidad y detergente. El inicio del programa se puede retrasar un periodo de tiempo de entre 0:30 y 24 horas. Para detener y cancelar el ciclo activo, se puede utilizar la función de Vaciado. El botón Push&GO permite acceder directamente al programa Push&GO, un ciclo de lavado y secado que garantiza una buena limpieza en poco tiempo. La bandeja inferior tiene unos soportes desplegables que se pueden utilizar en posición vertical.
• Page 5: Guide rapide Merci d’avoir choisi un produit Indesit. Avant d’utiliser l’appareil, lisez attentivement les consignes de sécurité. Panneau de commande : comprend des touches pour marche-arrêt, sélecteur de programme, demi-charge, et d'autres voyants. Première utilisation : remplir le distributeur de détergent et le réservoir de sel. Le réservoir de sel ne doit jamais être vide pour éviter la formation de calcaire. L’adoucisseur d’eau réduit la dureté de l’eau et nécessite un remplissage régulier de sel. Remplir le distributeur de liquide de rinçage lorsque le voyant est allumé. Tableau des programmes : le programme Eco est le plus efficace pour la vaisselle normalement sale. Le programme Intensif est conseillé pour une vaisselle très sale, particulièrement pour les poêles et casseroles. Utiliser le programme Autonettoyant pour l’entretien du lave-vaisselle.
• Page 6: Les données du programme Éco sont mesurées sous des conditions en laboratoire conformément à la norme européenne EN 60436:2020. Aucun prétraitement de la vaisselle n’est nécessaire avant l’un quelconque des programmes. Les options ne peuvent pas toutes être utilisées en même temps. Les valeurs indiquées pour des programmes différents du programme Éco sont fournies à titre indicatif uniquement. La calibration du capteur peut augmenter la durée du programme jusqu’à 20 minutes. La fonction Demi-Charge peut être utilisée pour économiser de l’eau, de l’électricité, et du détergent. Le début du programme peut être retardé pour une période entre 30 minutes et 24 heures. Pour arrêter ou annuler le cycle en cours, vous pouvez utiliser la fonction Drainer. Le bouton Push&GO permet d’accéder directement au programme Push&GO, un cycle de lavage et séchage. Le panier à couvert doit uniquement être placé à l’avant du panier inférieur.
• Page 7: Guia Rápido Obrigado por ter adquirido um produto Indesit. Para beneficiar de uma assistência mais completa, registe o seu aparelho. Leia as instruções de segurança com atenção antes de usar o aparelho. Painel de comandos inclui botões para ligar/desligar, seleção de programas, meia carga, e indicadores luminosos. É obrigatório que o depósito de sal nunca esteja vazio. O depósito de sal deve ser enchido quando o indicador luminoso de reabastecimento do sal estiver aceso. O descalcificador de água reduz automaticamente a dureza da água, evitando a acumulação de calcário. O abrilhantador facilita a secagem da loiça e deve ser enchido quando o indicador luminoso de reabastecimento do abrilhantador se acender. A tabela de programas inclui opções como Eco, Intensivo, Mista, Fast&Clean, Noite, Extra Higienização, Pré-lavagem, Limpeza Automática, e Push&GO. O programa Eco é ideal para lavar loiça com um nível de sujidade normal e é o mais eficiente em termos de energia e água.
• Page 8: Os dados do programa ECO são avaliados em condições laboratoriais de acordo com a norma europeia EN 60436:2020. Não é necessário efetuar qualquer tipo de pré-tratamento da loiça antes de iniciar os programas. Os valores apresentados para todos os programas, à exceção do programa Eco, são meramente indicativos. A calibragem do sensor pode aumentar a duração do programa até 20 min. É possível selecionar diretamente a função OPÇÕES premindo o botão correspondente. Se a carga de loiça a lavar for reduzida, poderá ser utilizado o programa de meia carga para poupar água, eletricidade e detergente. O início do programa poderá ser diferido, num período entre 0:30 e 24 horas. Para parar e cancelar o ciclo ativo, pode utilizar a função de escoamento. O botão Push&GO permite acesso direto ao programa Push&GO, um ciclo de lavagem e secagem que garante um excelente desempenho de limpeza. É possível remover o braço aspersor inferior puxando-o para cima.