BOSCH SMV25DX01T-15 Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the water hardness values that can be  

The program data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the program and additional function  

selected.  

The runtime will change if the rinse  

aid system is switched off or rinse aid  

needs to be added.  

1. Press  

2. Press and hold and  

and flash.  

3. Release buttons.  

4. repeatedly until the required level  

has been set.  

.

Before using for the first time, make sure you read both the op- selected here.  

until  

erating and the installation instructions.  

A table of country-specific units can be found in the instruction  

manual.  

Hardness mmol/l  

range  

Level  

LED A  

LED B  

LED C  

0, 1, 2 or 3 LEDs will light up ac-  

cordingly.  

Soft  

Medium  

Hard  

0 - 1.1  

0

1

2

3

1.2 - 2.9  

3.0 - 3.7  

3.8 - 6.2  

5. Press  

to save the setting.  

a The LEDs go out.  

Program  

1) Duration [h:min]  

2) Energy [kWh]  

3) Water [l]  

Hard  

1) 2:15  

2) 1,500  

3) 15  

/

Intensive 70°  

1) 0  

/

2) 0  

Adding special salt  

Mix 65°  

3) 0  

1) 4:55  

2) 0,836  

3) 9,5  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

/

Eco 50°  

1) 1:00  

2) 1,300  

3) 11  

1 hr Programme  

1) 0:29 ¹  

2) 0,800  

3) 10  

/

4. Place the lid back on the dispenser and turn to  

close.  

Quick 45°  

1) 0:15  

2) 0,050  

3) 4  

/

PreRinse  

Adding rinse aid  

1

half standard load  

1. Press the catch on the lid 2. Add rinse aid up to the  

of the dispenser for rinse  

aid and lift  

max mark.  

2

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the 2. Close the lid of the deter-  

50 ml  

25 ml  

15 ml  

dry detergent dispenser.  

gent dispenser.  

a The lid clicks into position.  

How to use your appliance  

1. Load the tableware.  

tate freely. 4. Select the programme. 7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 3 seconds.  

2. Add detergent.  

5. Start the programme  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

3. Switch on the appliance  

.

6. Remove the tableware at the end of the pro-  

gramme.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMV25DX01T-15 Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMV25DX01T-15 Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting water softening system is important for optimal performance. The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the program and additional function selected. The runtime will change if the rinse aid system is switched off or rinse aid needs to be added. Before using for the first time, make sure you read both the operating and the installation instructions. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark in the dispenser for rinse aid. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware before loading.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system. Clean the filter elements under running water. Check the outlet nozzles on the spray arms for blockages. Insert the filter system into the appliance and turn the coarse filter clockwise. Troubleshooting Display for water supply lights up. Filters are soiled or blocked. Remnants of food on tableware. Rust spots on cutlery.