Home > Bosch > BOSCH SPS4HKI45G Dishwasher

BOSCH SPS4HKI45G Dishwasher

enꢀWater softening system  
to the dispenser for special salt  
immediately before the pro-  
gramme starts.  
stances. According to manufactur-  
ers, combined detergents with salt  
replacement substances can gen-  
erally only be used up to a water  
hardness of 26 °E without adding  
special salt.  
1. Unscrew the lid of the dispenser  
for special salt and remove.  
2. On initial start-up: Fill the dispenser  
right up with water.  
¡ The water hardness is 0 - 8 °E.  
You do not need to use special  
salt.  
3. Note: Only use special salt for  
dishwashers.  
1. Press  
.
Do not use salt tablets.  
2. To open the basic settings, press  
Do not use table salt.  
for 3 seconds.  
Add the special salt to the dis-  
penser.  
a The display shows Hxx.  
a The display shows  
.
3. Press  
repeatedly until the dis-  
play shows H00.  
4. To save the settings, press  
for 3 seconds.  
a The water softening system is  
switched off and the salt refill indic-  
ator is deactivated.  
Regeneration of the water  
softening system  
In order to obtain fault-free function of  
the water softening system, the appli-  
ance performs regeneration of the  
water softening system at regular in-  
tervals.  
Regeneration of the water softening  
system takes place before the end of  
the main rinse cycle in all pro-  
grammes. It will increase the run time  
and consumption values, e.g. water  
and electricity.  
Fill the dispenser right up with spe-  
cial salt. The water in the dis-  
penser is displaced and forced  
out.  
4. Place the lid back on the dis-  
penser and turn to close.  
Switching off the water  
softening system  
If you find the special salt refill indic-  
ator irritating, e.g. when using com-  
bined detergents with salt replace-  
ment substances, you can switch the  
indicator off.  
Overview of consumption values  
with regeneration the water  
softening system  
Here you can find an overview of the  
maximum additional run time and  
consumption values during regenera-  
tion of the water softening system.  
Note  
To avoid damage to the appliance, only  
switch off the water softening system in  
the following cases:  
Regeneration of the water softening 7  
system after x rinse cycles  
¡ The water hardness is max. 26 °E  
and you are using combined deter-  
gents with salt replacement sub-  
26  
   
GeneralDetails
NameBOSCH SPS4HKI45G Dishwasher
MakeBosch
LanguageEnglish
FiletypePDF (Download)
File size1.67 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMV6ZCX49E-39 Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SMI4HVS33E Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SRV2HKX39G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGS4HAW40G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SGH4HVX32G Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMS4ECI26E Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HTX27G Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SMV4HCX48E Dishwasher
BOSCH SPV4XMX28E Dishwasher
BOSCH SPV4XMX28E Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher
BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SPS4HKI45G Dishwasher