BOSCH SPV68C73UC, SPV68C73UC Dishwasher
Dishwasher Connectionꢀen-us
1. Slide the supplied brackets into the
slots of the toe panel you just
attached.
6. To cover the screw heads, use the
black plastic caps.
2. To ensure that the outer toe panel is
flush with the cabinetry base,
determine the correct position for
the brackets.
3. Mark the correct position, then slide
the brackets out and bend out the
metal tab at the correct position.
D
h
e
5ꢀDishwasher Connec-
tion
D
h
e
Follow these instructions to connect
the dishwasher.
5.1ꢀInstalling the Water Inlet
Connection
The hot water heater should be set to
deliver approximately 120 °F (49 °C)
[max. 140 °F/ (60 °C)] water to the
dishwasher. Water that is too hot can
cause some detergents to lose
effectiveness. Lower water
temperatures will increase run times.
The hot water supply pressure must be
between 7.25 - 145 psi (0.5 - 10 bar).
Bending a tab ensures that the toe
panel cannot slide in further.
4. Re-insert the brackets.
5. Secure the outer toe panel with the
crosshead screws provided.
WARNING
Scalding Hazard
▶ Do not perform any work on a
pressured hot water line. Serious
injury could result. Only qualified
plumbers should perform plumbing
work. Do not attempt any work on
‒ The outer toe panel should
completely cover the rubber
apron.
17
| General | Details |
|---|---|
| Name | BOSCH SPV68C73UC, SPV68C73UC Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.13 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher

























































