Home > BUFFALO > BUFFALO DK775 Digital Pass Through Dishwasher

BUFFALO DK775 Digital Pass Through Dishwasher

Cleaning and Maintenance  
Periodical Maintenance and Clean-up  
Maintenance should be carried out by trained personnel in accordance with the safety instructions.  
Daily Maintenance  
Washing arms should be disconnected and any debris should be removed using water and a  
nylon brush  
Debris remaining in the washing tank should be removed.  
Suction filter should be disconnected and cleaned with water.  
The inside of the tank should be cleaned up with a sponge or cloth and plenty of water.  
After cleaning operation is finished suction filter, water outlet pipe, scrap filters and washing and  
rinsing arms should be reinstalled.  
Periodical Maintenance  
Periodic maintenance should be carried out by the user at least once in a month, this should be done  
when the machine is ready for operation and before the glasses are set up in the machine.  
Descale the machine by adding descaler to the washing tank and follow descaler instructions (which  
may vary depending on brand).  
After descaling water within the machine should be drained and unit should be refilled with fresh water.  
Run the machine for 5 cycles then drain and refillagain with fresh water. The machine will now be  
ready for operation.  
If the device is not used for long period of time, you must drain the water left inside the boiler. For  
this purpose, let the water drain out after opening the tap (boiler tank tap) at the lower part of the  
unit. Leaving water standing inside the unit for long period when not in use may harm you r  
machine.  
Note  
Never use cleaning chemicals containing bleaching agents, chlorine or hypochloride.  
Never use steel sponge or wire brush for cleaning purposes.  
Do not use pressurized water to clean inner and outer surfaces of the appliance.  
Before cleaning the interior of the glasswasher, first carefully remove from the wash tank any parts that  
may cause injury during cleaning, suchas broken glass.  
Wipe clean the interior of the glasswasher. Once wastes and particles are removed, re-place  
the washing/rinsing arms and filters.  
Clean the outer surface of the glasswasher with a damp cloth.  
After drying, clean with a stainless-steel approved sanitizer (e.g. Jantex FS431)  
Electrical Circuit Diagram  
DK775  
GeneralDetails
NameBUFFALO DK775 Digital Pass Through Dishwasher
MakeBUFFALO
LanguageEnglish
FiletypePDF (Download)
File size0.46 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BUFFALO DK775,DN975 Dishwasher
BUFFALO DK775,DN975 Dishwasher
BUFFALO DK775 Dishwasher
BUFFALO DK775 Dishwasher

BUFFALO DK775 Digital Pass Through Dishwasher