BUSH DWFSE126W DWFSE126B Size Dishwasher
Installing your Dishwasher
Installing your Dishwasher
Bringing it all together
3.3 Water inlet hose
3.1 Positioning your Machine
When installing the machine, the mains plug of the
power cord and the water tap must be freely
accessible. When positioning the machine, place it
in an area where dishes can be easily loaded and
unloaded. Do not put the machine in an area where
the ambient temperature falls below 0°C.
Read all warnings located on the packaging before
removing the packaging and positioning the machine.
Place the machine close to a water tap and drain. Take
into consideration that the connections will not be
altered once the machine is in position.
WARNING: Use the new water inlet hose
supplied with your machine, do not use an old
machine’s hose.
WARNING: Run water through the new hose
before connecting.
Do not hold the machine by its door or panel.
Leave an adequate distance around the machine to
allow ease of movement when cleaning.
WARNING: Connect the hose directly to the
water inlet tap. The pressure supplied by the tap
should be a minimum of 0.04 MPa and a maximum
of 1.00 MPa. If the pressure exceeds 1.00 MPa, a
pressure relief valve must be fitted between the
connection.
Ensure the water inlet and outlet hoses are not
squeezed or trapped and that the machine does not
stand on the electrical cable while positioning.
Adjust the feet so the machine is level and balanced.
The machine should be placed on flat ground
otherwise it will be unstable and the door of the
machine will not close properly.
WARNING: After the connections are made,
turn the tap on fully and check for water leaks. Always
turn off the water inlet tap after a wash program has
finished.
3.2 Water Connection
We recommend fitting a filter to your water inlet supply
in order to prevent damage to your machine due to
contamination (sand, rust, etc.) from indoor plumbing.
This will also help prevent yellowing and deposit
formation after washing.
An Aquastop water spout is available with
some models. Do not damage it or allow it to
become kinked or twisted.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature
may be max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max.
temperature 60 °C.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installing your Dishwasher
16
| General | Details |
|---|---|
| Name | BUSH DWFSE126W DWFSE126B Size Dishwasher |
| Make | BUSH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.42 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 101 i Dishwasher
INVENTUM VVW6040AB Building Depot Dishwasher
FISHER and PAYKEL DD60ST4ZB9 Contemporary Tall Dishwasher
ORANIER GSV660 Fully Integrated Dishwasher
CMA DISHMACHINES EST-44 Conveyor Dishwasher
BOSCH SMS4ETW14E Dishwasher
Pelgrim GVW250XL Dishwasher
Whirlpool HDW-BI6006IE Dishwasher
AEG FFB53617ZW Dishwasher
BOSCH SMV4ECX21E-38 Dishwasher