CANDY CDIH 2L952-80 Dishwasher
Troubleshooting
Error codes on the display
Problem
Possible cause
Possible solution
Open the water tap.
Note: Whenever Error is
s o l v e d s w i t c h o f f t h e
appliance and restart the
programm.
Water tap is closed.
Water inlet hose has a kink or Make sure that the position of
Acoustic alarm,
a bend.
the hose is correct.
display shows
In case of aqua-stop system:
water protection is triggered;
the marker (C) is red.
ALARMCODE A10
The appliance does
not fill with water.
The hose must be replaced.
Clean the filter at the inlet
hose connections at tap and
the rear of the appliance.
Filter in the water inlet hose
is clogged.
Water inlet is clogged.
Check water flow from tap.
Contact your local water
authority.
Water pressure is too low.
ꢀ Scoop out as much water as
possible.
ꢀ Clean filters.
Filters are clogged.
ꢀ Continue programme by
pressing the START/PAUSE
button.
Acoustic alarm,
display shows
ALARMCODE A20
The appliance does
ꢀ Scoop out as much water as
possible.
ꢀMake sure that drain
water connection and piping
is correct and not blocked.
ꢀ Continue programme by
pressing the START/PAUSE
button.
The drainage is blocked.
Acoustic alarm,
display shows
ALARMCODE F30 the appliance.
Anti-flood device is on:
ꢀ There are water leakages in 2.Disconnect appliance from
1.Close the water tap.
power supply.
Leak: The drain
pump
runs permanently!
ꢀ The water inlet valve is
open and blocked.
ꢀ The drainage is blocked.
3.Contact Service.
All other Alarmcodes:
1. Note Alarmcode
2. Contact Service ; refer to CUSTOMER SERVICE
34
| General | Details |
|---|---|
| Name | CANDY CDIH 2L952-80 Dishwasher |
| Make | Candy |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.55 MB |

CANDY CI6C4F1PMW-80 Dishwasher

Candy CI 4C6F0PA Fully Dishwasher

























































