Home > Candy > Candy CI 4C6F0PA Fully Dishwasher

Candy CI 4C6F0PA Fully Dishwasher

2. WATER CONNECTION  
If the dishwasher is connected to new  
pipes or to pipes which have not been  
inuse for a long time run water through for  
a few minutes before connecting the inlet  
hose. In this way no deposits of sand or  
rust will clog up the water inflow filter.  
The appliance must be connected to  
the water mains using new hose-sets.  
The old hose-sets should not be  
reused.  
The inlet and drain hoses can be directed  
to left or right.  
The dishwasher can be connected to  
either cold or hot water, as long as it  
is no hotter than 60°C.  
Water pressure must be between 0,08  
MPa and 0,8 MPa.  
The inlet hose must be connected to a tap  
so that the water supply can be cut off  
when the machine is not in use (fig.1B).  
The dishwasher is fitted with 3/4"  
threaded connector (fig.2).  
Connect inlet hose "A" to water tap "B"  
with a 3/4" attachment making sure that it  
has been properly tightened.  
If it is necessary, the inlet pipe can be  
lengthened up to 2,5 m. The extension  
pipe is available from the After Sales  
Service Centre.  
106  
GeneralDetails
NameCandy CI 4C6F0PA Fully Dishwasher
MakeCandy
LanguageEnglish
FiletypePDF (Download)
File size2.85 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
CANDY CI6C4F1PMW-80 Dishwasher
CANDY CI6C4F1PMW-80 Dishwasher
CANDY CDIH 2L952-80 Dishwasher
CANDY CDIH 2L952-80 Dishwasher

Candy CI 4C6F0PA Fully Dishwasher