COOKOLOGY CSID601SS Dishwasher
INSTALLATION STEPS
1.
Affix the condensation strip under the work surface of cabinet. Please ensure the condensation
strip is flush with edge of work surface. (Step 2)
2.
3.
4.
5.
6.
Connect the inlet hose to the cold water supply.
Connect the drain hose.
Connect the power cord.
Place the dishwasher into the cabinet.
Level the dishwasher. The rear foot can be adjusted from the front of the dishwasher by
turning the Philips screw in the middle of the base of dishwasher use a screw driver.
To adjust the front feet, use a flat screw driver and turn the front feet until the dishwasher
is level. (Step 5 to Step 6)
7.
8.
Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)
Adjust the tension of the door springs by using a screw driver turning in a clockwise motion to
tighten the left and right door springs. Failure to do this could cause damage to your
dishwasher. (Step 11)
9.
The dishwasher must be secured in place. Fix the side with screws.
Levelling the dishwasher
Dishwasher must be level for proper dish rack operation
and wash performance.
1.
Place a spirit level on door and rack track inside the
tub as shown to check that the dishwasher
is level.
2.
3.
Level the dishwasher by adjusting the three levelling
legs individually.
When level the dishwasher, please pay attention not
to let the dishwasher tip over.
NOTE:
The maximum adjustment height of the feet is 50 mm.
| General | Details |
|---|---|
| Name | COOKOLOGY CSID601SS Dishwasher |
| Make | COOKOLOGY |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.26 MB |

COOKOLOGY CBID601 Dishwasher

COOKOLOGY CFSD613WH Dishwasher

COOKOLOGY 45cm Dishwasher





































