Home > epoq > epoq EDW60A42W23 Dishwasher

epoq EDW60A42W23 Dishwasher

INSTALLATION  
4. The condensation strip must be fitted  
to the underside of the worktop above  
your dishwasher to protect it against any  
moisture. Its purpose is to protect your  
worktop’s underside from steam rising from  
the dishwasher.  
3
Remove the backing paper from the  
condensation strip.  
5. Stick the condensation strip to the  
underside of the worktop.  
Leave some space  
Stick the Condensation  
Strip under the worktop,  
where you want to install  
the dishwasher.  
GB  
Ensure the surface is clean prior to  
sticking the condensation strip to the  
underside of the worktop.  
Failure to attach the condensation  
strip could result in damage to the  
underside of your worktop!  
6. Position the dishwasher next to a water tap  
and a drain. Ensure the water inlet and drain  
hoses are not kinked or squashed. The unit  
must not stand on the mains cable.  
7. Make sure your plumbing is suitable for use  
with the dishwasher. If in doubt contact  
a qualified plumber. This unit MUST BE  
connected to COLD WATER MAINS. The  
water pressure from the water mains needs  
to be at a minimum of 0.04 MPa and a  
maximum of 1.00MPa.  
Water mains  
Y-Adaptor  
(not included)  
Connect  
to another  
appliance if  
required.  
Connect the water supply hose to your  
water mains.  
Water supply hose  
After connecting the hose, turn on your  
water mains and check for leaks.  
11  
GeneralDetails
Nameepoq EDW60A42W23 Dishwasher
Makeepoq
LanguageEnglish
FiletypePDF (Download)
File size43.21 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
epoq EDW45B42W23 45cm Dishwasher
epoq EDW45B42W23 45cm Dishwasher

epoq EDW60A42W23 Dishwasher