Home > epoq > epoq EDW60A42W23 Dishwasher

epoq EDW60A42W23 Dishwasher

Adding Salt  
If the water in your area is hard, deposits will form on your dishes and utensils. As such, this  
appliance contains a salt reservoir for you to reduce the hardness of the water.  
Please follow the steps below to pour the salt into the salt reservoir and to correspond to the  
water hardness level in your area.  
1. Remove the lower basket and unscrew the reservoir cap.  
open  
open  
open  
GB  
2. Place the funnel provided over the salt reservoir. Pour in  
approximately 1.5kg of dishwasher salt depending on the  
brand used.  
3. Fill the reservoir with water until it overflows (first use only).  
4. Clean any excess salt from around the reservoir opening and  
then screw the cap on again firmly.  
5. Run the “Rapidwash programme immediately (without any  
crockery in the dishwasher) to remove any traces of salt from  
the compartment.  
• The salt refill warning indicator on the control panel will illuminate when the reservoir  
is running out of salt and requires refilling.  
• The salt refill warning indicator will cease to illuminate within a few days, depending  
on how quickly the salt dissolves.  
• If you decide to use a detergent tablet, you may not need to add salt, this depends  
upon the water hardness in your area and the type of tablet being used. Check with  
your water supplier and the detergent tablet manufacturers instructions.  
20  
GeneralDetails
Nameepoq EDW60A42W23 Dishwasher
Makeepoq
LanguageEnglish
FiletypePDF (Download)
File size43.21 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
epoq EDW45B42W23 45cm Dishwasher
epoq EDW45B42W23 45cm Dishwasher

epoq EDW60A42W23 Dishwasher