Home > FAGOR > FAGOR AD-120CW Door Style Dishwasher

FAGOR AD-120CW Door Style Dishwasher

REQUESTED QUALITY OF THE WATER  
Hardness: 510º F  
Conductivity 2002000 µS  
pH 6.5 – 7.5  
Chloride’s concentration < 150 m g/litre  
Chlorine 0.20.5 mg/litre  
Impurities < 0,08 mm  
It is necessary to remove all foreign debris from the water line that may potentially get trapped in the valves  
or cause an obstruction, prior to connecting to the machine.  
Use only the supplied hoses (3/4” Female hose connector) at the water connections. Failure to do so may  
result in damage to the solenoid valve threads and leaking. Tighten by hand. Connect the bent side of the hose  
to the machine. Adaptor supplied for ¾” female garden hose connection.  
FOR HARD WATER SUPPLIES WITH A HARDNESS OF OVER 2 GRAINS OR 10ºF AND PH BEYOND THE RANGE  
OF 7.0 – 8.5, A WATER CONDITIONER MUST BE INSTALLED.  
Slowly turn on the water supply to the machine after the incoming fill line and the drain line have been  
installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in  
operation.  
WATER DRAINAGE INSTALLATION  
Attach the drain hose as shown in Fig. 5. It is recommended to affix a siphon pipe to prevent odors. All  
piping from the machine to the drain must be a minimum 11/2” I.P.S. There should also be an air gap between  
the machine drain line and the drain. For natural overflow efficiency use floor drain.  
D = Drain hose  
C = Drain collector  
A = Air Gap  
F = Scrap Basket  
Fig. 5  
For Customer Service: Call 1866GO FAGOR – www.fagorcommercial.com |  
P. 7  
GeneralDetails
NameFAGOR AD-120CW Door Style Dishwasher
MakeFAGOR
LanguageEnglish
FiletypePDF (Download)
File size0.72 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
FAGOR 3LVF-421.1, 3LVF-421.1X Dishwasher
FAGOR 3LVF-421.1, 3LVF-421.1X Dishwasher
FAGOR 3LVF-423.1X Dishwasher
FAGOR 3LVF-423.1X Dishwasher

FAGOR AD-120CW Door Style Dishwasher