Home > FISHER and PAYKEL > FISHER AND PAYKEL DW60UT4I2 Dishwasher
FISHER AND PAYKEL DW60UT4I2 Dishwasher
DOOR PANEL PREP
PUSH INTO CAVITY
Using a flat bladed screwdriver, turn to
raise the leveling feet. Level the rear,
outside legs first followed by the front
legs. Do not adjust the rear middle
leg yet.
Ensure door panel meets all
specifications.
1
2
3
1
Remove both screw covers before
partially pushing the product into the
cavity, pulling the hoses through as you
push to avoid crushing or twisting them.
Take care not to bend the legs.
Using the template as a guide, pre-drill
all holes into the panel.
2
Push the product from the outside
edges to avoid door damage.
Check the product sits level within
the cavity.
Ensure the sliding bracket is oriented
correctly before securing it to the panel.
3
If required, the rear middle leg can be
adjusted from the front of the product
using a 5mm Allen key.
Select desired spacer width and cut
to size. Remove adhesive and fit two
spacers to each side of the product.
Loosely fit both 16mm Philips hanging
screws onto the door panel. Ensure
there is a minimum space of 3 mm
between the screw-head and the panel.
4
4
Push the product into the cavity from
the outside edges.
12
| General | Details |
|---|---|
| Name | FISHER AND PAYKEL DW60UT4I2 Dishwasher |
| Make | FISHER and PAYKEL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.2 MB |

FISHER and PAYKEL DD60SCTX9 Dishwasher

FISHER and PAYKEL DD60DDFHX9 Dishwasher

FISHER and PAYKEL DD24SCTB9 N Dishwasher

FISHER and PAYKEL DD60SCTW9 Dishwasher

FISHER and PAYKEL DD60SDFTX9 Dishwasher

Fisher and Paykel DW24UT2I2 Dishwasher

FISHER AND PAYKEL DD24SHTI9N Dishwasher

FISHER AND PAYKEL DD60SDFHTX9 Tall Dishwasher

FISHER AND PAYKEL DD24DTI9 N Dishwasher

FISHER AND PAYKEL DD24STI9 Dishwasher


































