FISHER PAYKEL DD24SVT9 Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

SINGLE DISHDRAWER™ DISHWASHER  

CONTEMPORARY  

DD24SA9, DD24SDT9 & DD24STN9  

PROFESSIONAL  

DD24SVT9  

INSTALLATION GUIDE  

US CA  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	FISHER PAYKEL DD24SVT9 Dishwasher
Make	Fisher & Paykel
Language	English
Filetype	PDF (Download)
File size	1.29 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Fisher & Paykel

FISHER PAYKEL DD24SVT9 Dishwasher Overview

Summary of Contents

• Page 1: Single Dishdrawer™ dishwasher Contemporary Professional Installation guide
• Page 2: Safety and warnings To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety instructions listed below. Electric shock hazard Do not repair or replace any part of the appliance unless specifically recommended in this guide. Installation of this DishDrawer requires basic mechanical and electrical skills. This appliance must be earthed. Ensure all water connections are turned off. The DishDrawer must be installed to allow for future removal from the enclosure if service is required. The switched power outlet must be outside the dishwasher cavity. Improper connection of the equipment-earthing conductor can result in a risk of electric shock. Ensure only supplied hoses are used for connection. Take care - panel edges are sharp.
• Page 3: Tools and components Parts supplied Tools required Keep all packing materials until the unit has been inspected. Inspect the product to ensure there is no shipping damage. Fisher & Paykel is not responsible for shipping damage. This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. Installation should be undertaken by a Fisher & Paykel trained and supported service technician or qualified person. To access installation videos, scan the QR code with your smartphone or watch online.
• Page 4: Product dimensions — DD24SC models Overall height Overall width Overall depth Depth of chassis Height of door panel Depth of door panel Ventilation gap below door panel Height from top of drawer panel to top of chassis Max. drawer extension from front of chassis Actual product dimensions may vary by 1/16” (2 mm)
• Page 5: Product dimensions — DD24SD models Overall height Overall width Overall depth Depth of chassis Height of door panel Depth of door panel Ventilation gap below door panel Height from top of drawer panel to top of chassis Max. drawer extension from front of chassis Actual product dimensions may vary by 1/16 (2 mm)
• Page 6: Product dimensions — DD24STN models Overall height Overall width Overall depth Depth of chassis Height of door panel Depth of door panel Ventilation gap below door panel Height from top of drawer panel to top of chassis Max. drawer extension from front of chassis Actual product dimensions may vary by 1/16 (2mm)
• Page 7: Product dimensions — DD24SV2T9 models Overall height Overall width Overall depth Depth of chassis Height of door panel Depth of door panel Ventilation gap below door panel Height from top of drawer panel to top of chassis Depth of handle Max. drawer extension from front of chassis Actual product dimensions may vary by 1/16 (2mm)
• Page 8: Cabinetry Dimensions Clearances Ensure the relationship between benchtop overhang and the recessed handle has been considered. Connections can be located in an adjacent cabinet on either side of the DishDrawer™ Dishwasher. Minimum clearance to adjacent cupboard door. Minimum inside height. Minimum clearance to corner cupboard. Minimum overall depth. Minimum toe kick height.
• Page 9: Plumbing and electrical considerations are essential for installation. Services can be installed on either the left-hand or right-hand side of the product. Refer to ‘Cabinetry preparation’ for service access requirements. If the supplied drain hoses are insufficient, a drain hose extension kit can be purchased. The recommended water temperature is hot, with a maximum of 140°F (60°C). Ensure the water connection complies with local plumbing regulations. Water pressure requirements vary between water softener and non-water softener models. Electrical requirements include a minimum of 120V (60Hz) and 4.2A. Dimensions for drain hoses, power cord, and inlet hose are specified. Minimum distances from the floor to various components are outlined.
• Page 10: You have the option to hard-wire your DishDrawer™ Dishwasher. To do this, we recommend removing the supplied power cord and doing the hardwiring installation as close to the cavity as possible. Ensure only copper conductors are used. Slide the terminal block cover sideways to unlock and hinge open to access the terminal block. Open the drawer and press both locking tabs back to release. Unscrew the Live, Neutral and Earth wires as shown. Lift the drawer off the runners and carefully set aside on a protected surface. Take care not to pull the drawer out too far to prevent any strain on the hoses. Safely cut the cord from the inside and outside of the product to remove the cord. Fit a suitable cable clamp for the conduit through the metal knockout.
• Page 11: Hard wiring (optional) Screw down the Live, Neutral and Earth wires correctly. Refit module cover before sliding the access cover back into place, ensuring the 2 clips shown are fully locked. Before refitting the drawer, ensure the hoses are not twisted. Refit the drawer to the runners and clip into place via both locking tabs. Refit the drawer back onto the runners, ensure both runners are extended halfway before lowering the tub. Slide the runners forward to engage.
• Page 12: Cabinetry preparation is essential for proper installation. Service access is necessary for maintenance and operation. Moisture protection is crucial to prevent damage. Service holes can be created on either side of the DishDrawer™ Dishwasher cavity. Ensure edges are smooth and rounded if the hole is created through wood. Fit an edge protector if the hole is created through metal. Align the supplied moisture protection tape to the cabinetry. Ensure the area is free of debris before applying the tape. Select a cabinetry securing method: via brackets or drawer removal. Service hole dimensions must meet specified measurements for proper installation.
• Page 13: Secure all four side brackets to the DishDrawer™ Dishwasher, aligning bracket A with slot A and bracket B with slot B. Secure to cabinetry via the brackets. Pre-drilling a pilot hole may be required depending on the cabinetry material. Ensure the ends of the brackets are not pushed into the chassis. Push the product into the cavity, pulling the hoses through as you push to avoid crushing or twisting them. Replace the trim cover and repeat for the remaining brackets. Push the product in the positions illustrated to avoid denting the door. Partially open the drawer and remove the first screw cover from the trim moulding.
• Page 14: Secure to cabinetry via all three fixing locations in the chassis. Push the product into the cavity, pulling the hoses through as you push to avoid crushing or twisting them. Ensure sound insulation is replaced correctly. Open the drawer and press both locking tabs back to release. Before refitting the drawer, ensure the hoses are not twisted. Refit the drawer to the runners and clip into place via both locking tabs. Lift the drawer off the runners and carefully set aside on a protected surface. Push runners back in. Take care not to pull drawer out too far to prevent any strain on the hoses. Where possible, protect the base of the tub to prevent damage.
• Page 15: Plumbing & electrical connection Sink trap/waste tee installation Install the drain hose support to the back wall, as close to the underside of the countertop as possible. Refer to ‘Plumbing & electrical considerations’ for minimum install heights. Ensure the drain hose does not extend into water retained in the trap; an air gap is required to prevent waste water from siphoning back into the tub. Unplug or drill out the waste tee before securing joiner to sink trap or waste tee. Connect the inlet hose to tap and hand-tighten into place. Using a spanner or pliers, turn a further 180° to secure, avoiding over-tightening. Do not turn water supply on. The DishDrawer™ Dishwasher must be powered on for the flood protection feature to be enabled. Plug product in.
• Page 16: Plumbing & electrical connection Install your Air Gap Kit to the benchtop. We recommend using a Dual Air Gap Kit. Refer to ‘Plumbing & electrical connection’ for minimum install heights. Thread wire clips onto the hoses before fitting them to the hose joiner. Unplug or drill out the waste tee before securing to sink trap or waste tee. Connect the inlet hose to tap and hand-tighten into place. Using a spanner or pliers, turn a further 180° to secure. Avoid over-tightening. The DishDrawer™ Dishwasher must be powered on for the flood protection feature to be enabled.
• Page 17: Installer checklist to be completed by the installer includes important steps for installation and electrical checks. Check all parts are installed correctly and are secure. Ensure all electrical tests have been conducted in accordance with local regulations. Ensure DishDrawer™ Dishwasher is securely fastened to the cabinetry and drawer opens and closes freely with no resistance. Test operation by turning on the power and water supplies, then opening the drawer. Ensure panel is fitted correctly to the DishDrawer™ Dishwasher. Add three cups of water into the drawer and navigate to RINSE to start the program. Check the spray arm is in place, mounted correctly, and rotates freely. Ensure knock-to-pause module is fitted securely and operating correctly. Check drainage connections for leaks and ensure water supply has been shut off correctly. Adjust the water softener setting to suit the water hardness of the area if applicable.
• Page 18: Troubleshooting for DD24SD, DD24S, DD24ST4N, and DD24ST4Z models includes various issues and solutions. The DishDrawer beeping continuously may indicate a water supply fault. Ensure the water supply is turned on and power is connected. If no program indicator lights up, press to stop the beeping and clear the fault. Check for obstructions preventing the drawer from closing properly. Water appearing around supply and drain connections may indicate blockages. If the product is tipping, check the spray arm and ensure it is secured to the cabinetry. Misaligned front panels may result from low water pressure or excessive foaming. Refer to the user guide for additional troubleshooting if problems persist. For warranty details or further assistance, consult the Service & Warranty book.