FORTE F24DWS450PR Dishwasher
FEATURES OF YOUR NEW DISHWASHER
How your dishwasher cleans Getting Started
Your dishwasher cleans by spraying
a mixture of hot water and detergent
through the spray arms against
soiled surfaces .
1.Load the dishwasher (See Dish Preparation and
Loading sections).
2.Add detergent (See Filling the detergent dispenser).
3.Add rinse aid (See Filling the rinse aid dispenser).
4.Select desired CYCLE (See Cycle Chart).
The dishwasher fills with water
covering the filter area. Water is then
pumped through the multiple filter
and spray arms. Separated soil
particles go down the drain as the
water is pumped out and replaced
with clean water.
5.Select desired OPTIONS (See Control Panel).
The indicator light above the pad will glow when
selected.
The number of water fills will vary
with the cycle being used.
6.Run the hot water faucet nearest the dishwasher
until the water is hot, then turn it off.
7.To start, press Start/Cancel (See Control Panel).
Then close door.
NOTE
This model is embedded operation, all buttons
can only be operated in the open state.
Wash Cycle Selections
Cycle times are approximate and will vary with the
options selected. Hot water is necessary to activate
the detergent and melt fatty food soils. An automatic
sensor will check the incoming water temperature. If
it is not at the appropriate temperature the timer will
delay the cycle to allow automatic water heating during
the main wash. When the HI-TEMP wash is selected
an even higher temperature will be assured to handle
heavier soil loads.
4
| General | Details |
|---|---|
| Name | FORTE F24DWS450PR Dishwasher |
| Make | FORTE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.94 MB |

Forte F24DWS650PR Dishwasher

FORTE F18DWS450PR Dishwasher

FORTE F18DWS250SS 18 Inch Dishwasher

































