Hotpoint HDA2100HCC Dishwasher

1

2

3

4

5

6

7

8

Daily Reference Guide  

EN  

Before using the appliance carefully read  

Safety and Installation Instructions. More information about your  

product available on website: docs.hotpoint.eu  

THANK YOU FOR BUYING A HOTPOINT PRODUCT.  

In order to receive a more complete assistance, please  

register your appliance on: www.hotpoint.eu/register  

After installation, please remember to remove all transport protection  

parts from the dishwasher.  

CONTROL PANEL  

1. ON-OFF/Reset button with indicator light  

2. PREVIOUS program button  

3. NEXT program button  

4. FAVOURITE program button with indicator light  

5. Salt reservoir empty indicator light  

6. Rinse Aid reservoir empty indicator light  

7. DESCALE indicator light  

8. Closed Water Tap indicator light  

9. Key lock indicator light  

10. Program number and remaining time indicator  

11. Display  

12. 3D Zone Wash option button with indicator light  

1

2

3

4

5 6 7 8 9 10  

11  

12  

13  

14 15  

16  

13. Half Load option button with indicator light/ Settings - 3 sec. press  

14. Extra Dry Option button with indicator light/ Keylock - 3 sec. press  

15. Delay option button with indicator light  

16. START/Pause button with indicator light  

FIRST TIME USE  

SETTING MENU  

Water Hardness Table  

1. Switch on the appliance by pressing the ON-OFF button.  

2. Hold the Settings (Half Load ) button for 3 seconds, until you hear  

a beep and the display shows„SEt”.  

°dH  

German degrees  

°fH  

French degrees  

°Clark  

English degrees  

Level  

1 (soft)  

3. After one second the first available setting (letter„h”) will be displayed.  

4. Press PREVIOUS /NEXT to scroll through the list of available settings  

(see table below), then press START/Pause to view and change the  

value of the currently selected setting.  

0 - 6  

7 - 11  

0 - 10  

11 - 20  

21 - 29  

30 - 60  

61 - 90  

0 - 7  

8 - 14  

2 (medium)  

3 (average)  

4 (hard)  

12 - 16  

17 - 34  

35 - 50  

15 - 20  

21 - 42  

43 - 62  

5. Press PREVIOUS /NEXT to change the value, then press START/Pause  

to save the new value and return to the main menu.  

6. To change another setting, repeat points 4 and 5.  

5 (very hard)  

7. Press ON-OFF or wait 30 seconds to exit the menu.  

WATER SOFTENING SYSTEM  

VALUES  

(Default - in bold)  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on the heater, contributing also to better clean-  

ing efficiency. This system regenerates itself with salt, therefore it is  

required to refill the salt container when empty. The frequency of re-  

generation depends on the water hardness level setting - regeneration  

takes place once per 4-6 Eco cycles with the water hardness level set to 3.  

The regeneration process occurs at the beginning of the cycle with addi-  

tional fresh water.  

LETTER  

SETTING  

Water Hardness Level  

(see “SETTING THE WATER HARDNESS”  

and “WATER HARDNESS TABLE”)  

1 | 2 | 3 | 4 | 5  

Rinse Aid Level  

(see “ADJUSTING THE DOSAGE OF RINSE AID”)  

0 | 1 | 2 | 3 | 4 | 5  

1 | 0  

NaturalDry (see “OPTIONS AND FUNCTIONS”)  

“1”= On, “0”= Off  

•

•

•

Single regeneration consumes: ~3L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

Sound  

“1”= On, “0”= Off  

1 | 0  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be  

filled when the RINSE AID REFILL indicator light in the control panel is lit.  

Factory Settings  

Press START/Pause to restore to the factory  

default all the values of the settings included in  

the settings menu.  

-

1. Open the dispenser  

pressing and pulling up the  

tab on the lid.  

B

by  

FILLING THE SALT RESERVOIR  

The use of salt prevents the formation of LIMESCALE on the dishes and on  

the machine’s functional components.  

The salt reservoir is located in the lower part of the dishwasher (under the  

lower rack on the left side).  

2. Pour in the rinse aid (max.110  

ml), making sure it does not  

overflow from the dispenser.  

If this happens, clean the spill  

immediately with a dry cloth.  

A

B

•

•

•

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

Salt must be filled when the SALT REFILL indicator light on the control  

panel is lit.  

3. Press the lid down until you hear a click to close it.  

NEVER pour the rinse aid directly into the appliance tub..  

Adjusting the dosage of rinse aid  

If you are not completely satisfied with the drying results, you can adjust  

the quantity of rinse aid used.  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir To change, follow instructions in the section “SETTING MENU”.  

If the rinse aid level is set to ZERO, no rinse aid will be supplied. The LOW  

RINSE AID indicator light will not be lit if you run out of rinse aid.  

A maximum of 6 levels can be set according to the dishwasher model.  

• If you see bluish streaks on the dishes, set a low number (0-3).  

• If there are drops of water or limescale marks on the dishes, set  

a mid-range number (4-5).  

right up to its edge (approximately 0,5 kg); it is not un-  

usual for a little water to leak out.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly so that no detergent can get into  

the container during the wash program (this could damage the water  

softener beyond repair).  

Run a program every time as soon as you completed refilling the salt  

reservoir to avoid corrosion.  

FILLING THE DETERGENT DISPENSER  

To open the detergent dispenser use the opening device C. Introduce  

the detergent into the dry dispenser D only. Place the amount of  

detergent for pre-washing directly inside the tub.  

1. When measuring out the detergent refer to the  

mentioned earlier information to add the proper  

quantity. Inside the dispenser D, there are indica-  

Setting the water hardness  

To allow the water softener to work in a perfect way, it is essential that the water  

hardness setting is based on the actual water hardness in your house. This infor-  

mation can be obtained from your local water supplier. The factory setting is“3”.  

See „WATER HARDNESS TABLE”.  

D

tions to help the detergent dosing.  

C

2. Remove detergent residues from the edges of the  

dispenser and close the cover until it clicks.  

To change, follow instructions in section“SETTING MENU”.  

Only use salt that has been specifically designed for dishwashers.  

After the salt has been poured into the machine, the SALT REFILL indicator  

light switches off.  

If the salt container is not filled, the water softener and the heating  

element may be damaged as a result of limescale accumulation.  

Use of salt is recommended with any type of dishwasher detergent.  

3. Close the lid of the detergent dispenser by pulling  

it up until the closing device is secured in place.  

The detergent dispenser automatically opens up at the right time accord-  

ing to the program.  

Usage of detergent not designed for dishwashers may cause  

malfunction or damage to the appliance.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Hotpoint HDA2100HCC Dishwasher
Make	Hotpoint
Language	English
Filetype	PDF (Download)
File size	5.92 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Hotpoint

Hotpoint HDA2100HCC Dishwasher Overview

Summary of Contents

• Page 1: Daily Reference Guide Before using the appliance carefully read safety and installation instructions. Thank you for buying a Hotpoint product. After installation, please remember to remove all transport protection parts from the dishwasher. Control panel includes various buttons for program selection and indicators for salt and rinse aid levels. First time use involves switching on the appliance and accessing the settings menu. Water softening system automatically reduces water hardness, preventing scale buildup and improving cleaning efficiency. Rinse aid makes dish drying easier and should be filled when the rinse aid refill indicator light is lit. It is mandatory that the salt reservoir never be empty, and it is important to set the water hardness. Adjusting the dosage of rinse aid can improve drying results based on observed dish conditions. To open the detergent dispenser, use the opening device and introduce detergent into the dry dispenser only.
• Page 2: Check that the dishwasher is connected to the water supply and that the tap is open. If a wrong program was selected, it is possible to change it, provided that it has only just begun. Start the cycle by pressing the START/Pause button. Select the most appropriate program in accordance with the type of crockery and its soiling level. Without switching off the machine, open the door slightly to avoid water splashing out and place the crockery inside the dishwasher. The end of the wash cycle is indicated by sound and the display shows END. Before loading the baskets, remove all food residues from the crockery and empty the glasses. Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended. To avoid odour and sediment which can be accumulated in the dishwasher, please run a high-temperature program at least once a month. If the appliance is placed in surroundings exposed to the risk of frost, it must be drained completely.
• Page 3: Daily Reference Guide Programs Table Eco 50° - Program is suitable to clean normally soiled tableware, being the most efficient in terms of energy and water consumption. Auto Intensive 65° - Automatic program for heavily soiled dishes and pans, adjusting the cycle duration based on soil level. Auto Mixed 55° - Automatic program for normally soiled dishes with dried food residues. Auto Fast Wash 50° - Automatic program for normally and lightly soiled dishes, ensuring optimal cleaning in a shorter time. Delicates 45° - Program for delicate items sensitive to high temperatures, such as glasses and cups. Good Night 55° - Suitable for night-time operation, ensuring optimal cleaning with low noise emission. Sanitizing 65° - For normally or heavily soiled crockery, with an additional antibacterial wash. Soak - Used to refresh crockery planned to be washed later, without detergent. Self Clean 65° - Program for dishwasher maintenance, to be used only when the dishwasher is empty. Options and Functions 3D Zone Wash - Provides additional power jets for more intensive washing. ActiveDry - A convection drying system that opens the door during/after drying for exceptional performance. Half Load - Saves water, electricity, or time when washing fewer dishes. Extra Dry - Improves drying with a higher temperature during the final rinse. Descale – Alarm indicates limescale accumulation; check water hardness setting and use a descaling product. Delay - Allows the start of the program to be delayed between 0:30 and 24 hours. Sensing - Detects soil level and updates cycle duration accordingly. Favourite - Saves a preferred program for easy access. Keylock - Blocks the control panel except for the ON/OFF button. Water Tap Closed – Alarm indicates no inlet water or closed water tap.
• Page 4: Capacity: 15 standard place-settings The third rack was designed to house the cutlery. The side foldable flaps can be folded or unfolded to optimize the arrangement of crockery inside the rack. Arrange the cutlery as shown in the figure for easier collection after washing. Knives and other utensils with sharp edges must be positioned with the blades facing downwards. The lower rack has tip-up supports for arranging plates or loading pans and salad bowls easily. Load delicate and light dishes in the upper rack. The height of the upper rack can be adjusted to create more space upwards. 3D Zone Wash uses additional water jets to wash heavily soiled items more intensively. Regularly clean the filter assembly to prevent clogging and ensure proper water flow.
• Page 5: Daily Reference Guide Cleaning the spray arms Food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is recommended to check the arms and clean them with a small non-metallic brush. Troubleshooting In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. Salt indicator is lit Refill the reservoir with salt. Check the water hardness setting if necessary. Rinse aid indicator is lit or blinking Rinse aid dispenser is empty. Refill the dispenser with a rinse aid. Descale indicator is lit or blinking Descale the appliance immediately using the Self Clean program and a commercially available descaling product. The dishwasher won’t start or does not respond to commands The appliance has not been plugged in properly. Insert the plug into the socket. The control panel does not respond or F6 E1 is displayed Clean the filter and descale the appliance. The dishwasher won’t drain Check the drain hose. Clean the sink drain pipe. The dishwasher makes excessive noise An excessive amount of foam is present. Arrange the crockery correctly. The dishes are not clean The filter is clogged with food residues or limescale. Clean the filter and descale the appliance.
• Page 6: Problems possible causes and solutions are outlined for dishwasher issues. The dishwasher does not fill with water due to no water supply or a closed tap. Check the inlet hose for kinks and ensure it is not clogged. The dishwasher finishes the cycle prematurely if the drain hose is positioned too low. Ensure the detergent is measured correctly and suitable for dishwashers. Check for air leaks in the water supply and refill the rinse aid dispenser. Dishes may not dry well if unloaded too early or if they are sitting too flat. Verify if the selected program includes a drying phase for better results. Blue streaks on dishes may indicate excessive rinse aid dosage or an empty salt reservoir. Check the water hardness setting and ensure the salt reservoir cap is properly closed. A blocked or faulty valve may require service intervention.
• Page 7: Page 7
• Page 8: Page 8