Home > forza > FORZA FD24DI Dishwasher

FORZA FD24DI Dishwasher

Installation Preparation  
The dishwasher must be installed so that drain hose is no more  
than 10 feet in length for proper drainage.  
The dishwasher must be fully enclosed on the top, sides and  
back, and must not support any part of the enclosure.  
Countertop  
Dishwasher  
CLEARANCES:  
When installed into a corner, allow 2”  
min. clearance between dishwasher  
and adjacent cabinet, wall or other  
appliances. Allow 25-5/8” min. clear-  
ance from the front of the dishwash-  
er for door opening. Figure B  
Clearance for Door Opening  
2” Min.  
The rough cabinet opening must be at least 24”  
deep. The opening should be 35” max. height.  
Drain Requirements  
Method 1 - Air Gap with Waste Tee or Disposer  
Follow local codes and ordinances.  
Do not exceed 10 feet distance to drain.  
Do not connect drain lines from other devices  
to the dishwasher drain hose.  
Dishwasher must be connected to waste line  
with an air gap (not supplied) or 32” minimum  
high drain loop, depending on local codes and  
ordinances to prevent back flow into the dish  
washer.  
Method 2 - High Drain with Waste Tee Disposer  
Provide a method to attach drain hose to underside of  
countertop.  
Air gap must be used if waste tee or dispose  
connection is less than 18” above the footer to  
prevent siphoning.  
Drain Preparation  
The type of drain installation depends on  
answers to the following questions:  
Do local codes or ordinances require an air gap?  
Will waste tee or disposer connection be less than  
18” above the floor?  
Will installation have a drain loop less than 32” above  
Install waste tee or disposer and air gap according to  
manufacture’s instructions.  
floor?  
CABINET PREPARATION  
If the answer to ANY of the 3 questions above is YES,  
Method 1 Must be used. Otherwise either Method 1 or  
Method 2 may be used. Figure C or Figure D.  
• Drill a 1-1/2” dia. hole in the cabinet wall within the shaded  
areas shown in Figure A for the drain hose connection. The  
hole should be smooth with no sharp edges.  
CAUTION: An air gap MUST BE USED if the drain hose is connected to waste tee or disposer lower than 18” above the floor.  
Failure to provide drain connection height with air gap or 32” minimum, high drain loop will result in improper draining of the  
dishwashers.  
5
GeneralDetails
NameFORZA FD24DI Dishwasher
Makeforza
LanguageEnglish
FiletypePDF (Download)
File size0.33 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

FORZA FD24DI Dishwasher