FORZA FD24DI Dishwasher
Installation Instructions
STEP 3: Remove Toekick
STEP 2: Adjust Leveling Legs
•
Remove the 2 toekick screws. Lift off the 1 piece
toekick.
•
Move the dishwasher close to the installation location
and lay it on its back.
•
Measure installation height and dishwasher height.
Extend leveling legs out from the dishwasher base,
1/4” less installation height.
STEP 4: Install Power Cord
STEP 5: Install 90o Elbow
•
Skip this step if dishwasher will be direct wired. Use
power cord kit. The power cord and connections
must comply with local codes and ordinances.
•
Wrap 90o elbow with thread seal tape. Do not use
plumber’s putty.
•
Install a 90° elbow onto the water valve.
•
Recommended power cord length is 54” min. - 64” max.
•
Do not over tighten 90° elbow water valve bracket
could bend or water valve fitting could break.
Position the end of the elbow to face the bottom right
of the dishwasher.
•
Connecting incoming power cord white (or ribbed)
•
to dishwasher white, black (or smooth) to black and
ground to dishwasher green wire. Use cUL/UL listed
wire nuts of appropriate size.
•
Replace junction box cover. Be sure wires are not
pinched under the cover.
8
| General | Details |
|---|---|
| Name | FORZA FD24DI Dishwasher |
| Make | forza |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
FISHER AND PAYKEL DD24DDFTX9 Dishwasher
Midea MDF24P2B Dishwasher
Monsher MD 6003 Dishwasher
ZLINE Kitchen DW7713 Classic Dishwasher
FISHER PAYKEL DW24UNT2X2 Built Under Dishwasher
ASKO DSD5444D Dishwasher
FISHER AND PAYKEL DD60SDFHTX9 Tall Single DishDrawer Dishwasher
IKEA AA-2412057-2-1 RÅGLANDA Dishwasher
dacor EDWH24S Dishwasher
FISHER AND PAYKEL DW24UT4I2 Dishwasher