Home > Frigidaire > FRIGIDAIRE FDPC4314A Dishwasher
FRIGIDAIRE FDPC4314A Dishwasher
16
Before calling for service, review this
list. It may save you both time and
expense. This list includes common
experiences that are not the result of
defective workmanship or material in
your dishwasher.
TROUBLESHOOTING
•
•
•
Check for proper loading-avoid nesting
items.
Before You Call:
Plastic items may need to be towel
dried.
Cups with a concave bottom will collect
water. Load them at the far left of the
upper rack so they will be held in a tilted
position.
Food Soils Left on Dishes
•
Containers, bowls, pots/pans, and any
dishware with concave surfaces that
can collect water should be placed
in the rack facing or angled down so
that water is able to drain even from
the lowest point.
•
•
•
•
Choose another cycle for longer
washing time.
Check rack loading section for
proper loading-avoid nesting items.
Do not overload the dishwasher (See
Preparing and Loading Dishes).
Drying Tip
Select the Normal Wash and High
Check to verify that the glass trap
is maintained and installed properly
(See Care and Cleaning).Home water
pressure may be too low-should be 20
to 120 pounds per square inch (psi).
•
Temp pads along with a Rinse
Aid agent for improved drying
performance.
Glassware/Flatware Spotted or Cloudy
•
•
Check incoming water temperature.
It should be about 120oF (49oC). (See
Factors Affection Performance).
•
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
•
Water temperature may be low.
Avoid extremely low or high
temperatures. (See Factors Affecting
Performance).
•
•
Use Fresh Detergent.
Make sure items are not blocking the
spray arms, preventing them from
rotating.
•
•
Avoid overloading and improper
loading. (See Preparing and Loading
Dishes).
Dishes not Dry
• If you have not selected Max or Heat
Use fresh detergent. Old detergent is
ineffective.
Dry, and no LEDs are illuminated
for these Options, then the heater
has been de-activated during the
drying phase of the selected Wash
Cycle. This is known as Air Dry. Air
Dry slightly lowers the energy usage
but increases the likelihood that the
dishware will not be completely dried.
•
•
Make sure rinse aid dispenser is filled.
Check to see that proper amount
of detergent is being used for cycle
selected. (See Detergent Dispenser).
•
Home water pressure may be too
low-it should be 20 to 120 pounds per
square inch (psi).
•
Selecting Heat Dry, High Temp or
Sanitize Temp options will improve
drying performance.
•
•
•
Make sure the rinse aid dispenser is
filled.
Increase the discharge setting of
rinse aid. (See Rinse Aid).
Check the incoming water
temperature. Be sure it is at least
120oF (49oC).
| General | Details |
|---|---|
| Name | FRIGIDAIRE FDPC4314A Dishwasher |
| Make | Frigidaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.17 MB |

FRIGIDAIRE GDPH4525SS Dishwasher

FRIGIDAIRE GDPP4517A Gallery Series Dishwasher

FRIGIDAIRE FDPC4314AS Dishwasher

FRIGIDAIRE GDPH4515AF Gallery Dishwasher

FRIGIDAIRE FFBD2406NB Full Console Dishwasher

FRIGIDAIRE GDPH4525AF Gallery Dishwasher

FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher

FRIGIDAIRE FDHP4336AS Dishwasher

FRIGIDAIRE FDSR4501AP Panel Ready Dishwasher

FRIGIDAIRE FFBD1821MS Dishwasher

































