Home > Frigidaire > FRIGIDAIRE FFCD2413US Dishwasher
FRIGIDAIRE FFCD2413US Dishwasher
16
Before calling for service, review this
list. It may save you both time and
expense. This list includes common
experiences that are not the result of
defective workmanship or material in
your dishwasher.
TROUBLESHOOTING
can collect water should be placed
in the rack facing or angled down so
that water is able to drain even from
the lowest point.
Before You Call:
Drying Tip
•
Select the NORMAL WASH and
HI-TEMP WASH pads along with a
Rinse Aid agent for improved drying
performance.
Food Soils Left on Dishes
•
•
•
•
Choose another cycle for longer
washing time.
Glassware/Flatware Spotted or Cloudy
•
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
Check rack loading section for
proper loading-avoid nesting items.
Do not overload the dishwasher (See
Preparing and Loading Dishes).
•
Water temperature may be low.
Avoid extremely low or high
temperatures. (See Factors Affecting
Performance).
Check to verify that the glass trap
is maintained and installed properly
(See Care and Cleaning).Home water
pressure may be too low-should be
20 to 120 pounds per square inch
(psi).
•
•
Avoid overloading and improper
loading. (See Preparing and Loading
Dishes).
•
•
Check incoming water temperature.
It should be about 120oF (49oC). (See
Factors Affection Performance).
Use fresh detergent. Old detergent is
ineffective.
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
•
•
Make sure rinse aid dispenser is filled.
Check to see that proper amount
of detergent is being used for cycle
selected. (See Detergent Dispenser).
•
•
Use Fresh Detergent.
Make sure items are not blocking the
spray arms, preventing them from
rotating.
•
Home water pressure may be too
low-it should be 20 to 120 pounds per
square inch (psi).
Dishes not Dry
•
•
•
•
Selecting Heat Dry or High Temp
Wash will improve drying.
Make sure the rinse aid dispenser is
filled.
Increase the discharge setting of
rinse aid. (See Rinse Aid).
Check the incoming water
temperature. Be sure it is at least
120oF (49oC).
•
•
•
Check for proper loading-avoid nesting
items.
Plastic items may need to be towel
dried.
Cups with a concave bottom will collect
water. Load them at the far left of the
upper rack so they will be held in a tilted
position.
•
Containers, bowls, pots/pans, and any
dishware with concave surfaces that
| General | Details |
|---|---|
| Name | FRIGIDAIRE FFCD2413US Dishwasher |
| Make | Frigidaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.08 MB |
(1 votes, average: 5.00 out of 5)
Loading...
FRIGIDAIRE GDPH4525SS Dishwasher
FRIGIDAIRE GDPP4517A Gallery Series Dishwasher
FRIGIDAIRE FDPC4314AS Dishwasher
FRIGIDAIRE GDPH4515AF Gallery Dishwasher
FRIGIDAIRE FFBD2406NB Full Console Dishwasher
FRIGIDAIRE GDPH4525AF Gallery Dishwasher
FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher
FRIGIDAIRE FDHP4336AS Dishwasher
FRIGIDAIRE FDSR4501AP Panel Ready Dishwasher
FRIGIDAIRE FFBD1821MS Dishwasher
BOSCH SMP4ECS79S Dishwasher
FISHER AND PAYKEL DD24SDFTX9 N Dish Drawer Dishwasher
FISHER PAYKEL DD60DDFB9 Dishwasher
INVENTUM VVW6035AW Dishwasher
FISHER PAYKEL DD60SCHX9 Dishwasher
BOSCH SMS6ZCW48E Dishwasher
BLAUPUNKT 5VF421AU Fully Integrated Dishwasher
FISHER AND PAYKEL DW60FC4B2 Contemporary Dishwasher
Whirlpool WFC3C42P Dishwasher
FISHER and PAYKEL DD60STI9 Tail Dishwasher