Home > GRUNDIG > GRUNDIG GSV 428420 Dishwasher

GRUNDIG GSV 428420 Dishwasher

Overflowing warning  
End of programme  
If the machine intakes too much water or  
there is leakage at any of the components  
then the machine will detect this and E:01  
icon will flash on the Programme indicator.  
As long as the overflowing continues safety  
algorithm will be active and try to discharge  
the water. If overflowing stops and safety  
is assured, E:01 icon will disappear. If E:01  
does not disappear, there is a permanent  
fault. In this case the authorised service  
should be contacted.  
When the programme you have  
selected comes to an end, an audible  
warning signal will warn you to turn off  
your machine. This audible signal will  
warn you with certain intervals before it  
turns off.  
End of Programme indicator will light up  
when the washing programme is over.  
1. Open the door of the machine.  
2. Press On/Off key to turn off your  
machine.  
SelfCare  
3. Close the tap.  
(depends on model)  
4. Unplug the machine from the socket.  
This programme is recommended to be  
operated on each 1-2 months for machine  
cleaning and necessary hygiene. The  
programme should be operated while the  
machine is empty.  
For energy saving, the machine is  
automatically turned off following the  
completion of the programme or if the  
programme is not started.  
In order to achieve an efficient result, it is  
recommended to use together with special  
machine cleaning agents.  
Leave your dishes in the machine for  
about 15 minutes to allow them cool  
down after they are washed. Your  
dishes will dry in a shorter time if you  
leave the door of your machine ajar  
during this period. This process will  
increase the drying effectiveness of  
your machine.  
Do not use this programme to  
clean dishes. As it operates in high  
temperatures, it is harmful for the  
dishes.  
Water cut-off warning  
If mains water is cut or water inlet tap is  
turned off the machine cannot take water in  
and E:02 icon will flash on the programme  
indicator. As long as the problem continues,  
washing programme is paused and the  
water inlet is checked regularly by the  
machine; when the water is restored E:02  
icon will disappear after a while and the  
washing programme resumes.  
38/EN  
GeneralDetails
NameGRUNDIG GSV 428420 Dishwasher
MakeGRUNDIG
LanguageEnglish
FiletypePDF (Download)
File size4.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
GRUNDIG GR5500 Dishwasher
GRUNDIG GR5500 Dishwasher
GRUNDIG GNFP3440X Dishwasher
GRUNDIG GNFP3440X Dishwasher
GRUNDIG GSV Dishwasher
GRUNDIG GSV Dishwasher
GRUNDIG GSV 42840 Dishwasher
GRUNDIG GSV 42840 Dishwasher

GRUNDIG GSV 428420 Dishwasher