Hisense HV693C60UK Dishwasher
Setup
•
The recess and connection dimensions are included in the separate installation instructions. Check
that all dimensions are correct before starting the installation. Note that the height of the cover
door can be adjusted to match other fittings.
•
•
•
Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet
so that the dishwasher is level.
If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation
from the dishwasher.
Mount the protective film beneath the worktop and up around the edge. The function of the
protective film is to protect the worktop from moisture. (The protective film is in the enclosed
plastic bag.)
•
•
Check that the machine is installed such that the door opens freely, otherwise door lock functionality
may be disrupted.
Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left
and right door springs equally until the door is evenly balanced.
Drainage connection
This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so that the drainage hose runs to a lower level than
the bottom of the dishwasher, such as by routing it directly to a floor drain.
The drainage hose can also be connected to a connection nipple on the sink unit's water trap. The
connection nipple must have an internal diameter of at least 14 mm.
The drainage hose may be extended by a maximum of 3 m (the total length of the drainage hose must
not exceed 4.5 m). Any joints and connecting pipes must have an internal diameter of at least 14 mm.
No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher.
Attach the drainage hose with a hose clamp. Ensure that the drainage hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water tap (stopcock). The water tap must be easily accessible,
so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water tap and allow the pressure to settle for a while.
Check that all connections are watertight.
Connection to cold water supply
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an
energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot
water connection reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
35
| General | Details |
|---|---|
| Name | Hisense HV693C60UK Dishwasher |
| Make | Hisense |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.47 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hisense HFI663BXXL Dishwasher
Hisense HS673A60X Dishwasher
Hisense HV642C65UK Dishwasher
Hisense HSCE14FS Dishwasher
Hisense HV642E90UK Fully Dishwasher
Hisense HV643D90UK Dishwasher
Hisense HV642C60 Dishwasher
Hisense HS693C60XAD Dishwasher
Hisense HS622E90BUK Dishwasher
Hisense HS643D60WUK Dishwasher
INVENTUM VVW6046AW Dishwasher
FISHER PAYKEL DW60U4HI2 Built Under Dishwasher
Hotpoint H8I HP42 Fully Integrated Dishwasher
smeg STL362DQ Dishwasher
IKEA LAGAN Integrated Dishwasher
FISHER AND PAYKEL DD24SI9 N Dish Drawer Dishwasher
Hotpoint H7F HS51 Dishwasher
omega ODWIS6015X Dishwasher
Electrolux EES48401L Dishwasher
BOSCH SMS6ZCI12E Dishwasher