IKEA DISKAD Dishwasher
ENGLISH
12
Adding special salt
Adding rinse aid
If the special salt refill indicator lights up, add special salt to
the dispenser for special salt just before the programme
starts.
If the rinse aid refill indicator lights up, top up with rinse aid.
Only use rinse aid for domestic dishwashers.
→ Fig.
-
ATTENTION!
Setting water softening system
● Detergent may damage the water softening system.
● Only fill the dispenser of the water softening system
with special dishwasher salt.
Set the water hardness on your appliance.
→ Fig.
● Special salt can damage the tub due to corrosion.
● To make sure that any special salt that escapes is
washed out of the tub, add the special salt to the dis-
penser for special salt immediately before the pro-
gramme starts.
→ Fig.
-
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
WATER HARDNESS °E
0 - 8
HARDNESS RANGE
Soft
MMOL/L
SETTING VALUE
H:00
0 - 1.1
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
Soft
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H:01
H:02
H:03
H:04
H:05
H:06
H:07
Medium
Medium
Medium
Hard
Hard
Hard
27 - 38
39 - 62
Regeneration of the water softening sys-
tem – overview
In order to ensure fault-free function of the water softening
system, the water softening system is regenerated in all pro-
grammes before the end of the main rinse cycle.
Here you can find an overview of the maximum additional
running time and consumption values during regeneration
of the water softening system. You can find the column ap-
plicable to your product variant according to its water con-
sumption in the Eco 50° programme.
The consumption values specified are laboratory measure-
ments determined in accordance with the currently applic-
able standard and using the Eco 50° programme and the
factory value of the water hardness is set to 16 - 20°E.
Detergent
Only use detergents that are suitable for dishwashers. Both
separate and combined detergents are suitable.
For optimum washing and drying results, use separate de-
tergent, adding special salt and rinse aid separately.
Note: Follow the manufacturer's instructions for each deter-
gent.
If you are using tablets, one is enough. Insert the tablets in a
horizontal position.
If you are using powder or liquid detergent, follow the man-
ufacturer's instructions and quantities for dosage in the de-
tergent dispenser.
20 ml – 25 ml detergent is sufficient for normal soiling. If
tableware is only lightly soiled, slightly less than the amount
of detergent specified is usually sufficient.
Setting the amount of rinse aid
If there are streaks or water marks on tableware, change the
amount of rinse aid.
Note: A low level adds less rinse aid during the wash cycle, a
higher setting adds more rinse aid during the wash cycle.
→ Fig.
C
s
Controls
C
s
You can use the control panel to configure all functions of
your appliance and to obtain information about the operat-
ing status.
1
Switching on the appliance
Switching off the appliance
ON/OFF button
| General | Details |
|---|---|
| Name | IKEA DISKAD Dishwasher |
| Make | Ikea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.33 MB |

IKEA 404.755.53 Medelstor Dishwasher

IKEA 804.621.67 Lagan Dishwasher

IKEA RENGÖRA 204.756.05 Dishwasher

IKEA 9001774317 TORSBODA Dishwasher

IKEA 9001774318 Dishwasher

IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher

IKEA VILLBODA Dishwasher

IKEA 504.754.25 HYGIENISK Dishwasher

IKEA AA-2412057-2-1 RÅGLANDA Dishwasher

IKEA 905.681.49 OSTVEDA Dishwasher

















































