JennAir QQSCHIB Dishwasher
4.Add Rinse Aid
5.Select a Cycle (cycles vary
by model)
■
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid, your dishes and dishwasher interior
will have excessive moisture. The heat dry option will not perform
as well without rinse aid.
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Typical cycle time is approximately
2¹⁄₂ hours, but can take less or more time to complete depending on
selections.
■
Rinse aid keeps water from forming droplets that can dry
Full
as spots or streaks. It also improves drying by allowing
water to drain off of dishes after final rinse.
6.Select Options (options vary
by model)
Add
■
To add rinse aid, turn the
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not all
options are available for every cycle. If an invalid option is selected for a
given cycle, the lights will flash.
dispenser cap to “Refill” and lift
off. Pour rinse aid into the opening
until indicator level is at “Full.”
Replace dispenser cap and turn
to “Lock.” Make sure cap is fully
locked.
7.Start or Resume a Cycle
NOTE: Run hot water at the sink nearest your dishwasher until the
NOTE: For most water conditions, the factory setting will give good
results.
■
Check water hardness level to ensure no rings
or spots on your dishware before adding rinse
aid or adjusting the factory setting.
water is hot. Turn off water.
■
Push door firmly closed within 3 seconds of pressing START/
RESUME. If door is not closed within 3 seconds, the Start indicator
will flash, an audible tone will be heard, and cycle will not start.
■
If you are experiencing poor drying
performance, you may want to try a higher
setting.
IMPORTANT: If anyone opens the door (such as, for adding a dish,
even during the Delay Hours option), the START/RESUME button must
be pressed each time.
Turn the arrow adjuster inside the dispenser to
change rinse aid setting.
■
Press START/RESUME to repeat the same cycle and options as in
the previous wash cycle.
Cycle Guide
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
CYCLES
SOIL LEVEL
WASH TIME* (MINS.)
W/O OPTIONS
WATER
USAGE
GALLONS
(LITERS)
TYPICAL
MAX
The most advanced and versatile cycle. Sensor Wash cycle
senses the load size, soil amount, and toughness of soil, to
adjust the cycle for optimal cleaning using only the amount of
water and energy needed.
Light to Medium
Tough/Baked-On
Heavy
110
125
125
150
190
190
3.8 (14.5)
5.0 (19.1)
7.7 (29.0)
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and Heavy/Baked-On
140
205
7.9 (30.0)
tableware.
This cycle is recommended to completely wash a full load of
normally soiled dishes. Selecting this cycle will default to the
options recommended for normal amounts of food soil. The
energy label is based on this cycle.
Light
Medium
Heavy
110
110
125
150
150
190
2.8 (10.5)
4.0 (15.0)
7.7 (29.0)
Use for lightly soiled items or china and crystal.
Light to Medium
Heavy/Baked-On
105
120
145
185
4.2 (15.2)
7.7 (29.0)
When you need fast results, the 1 Hour Wash will clean dishes
using slightly more water and energy. Select the Precision Dry®
or Precision Dry®+ option to speed drying times (adds
All soil levels
58
63
6.2 (23.5)
approximately 27 to 35 minutes to the 1 Hour Wash cycle).
Use for rinsing dishes, glasses, and silverware that will not be
washed right away.
All soil levels
17
20
2.4 (9.0)
Do not use detergent.
| General | Details |
|---|---|
| Name | JennAir QQSCHIB Dishwasher |
| Make | JENNAIR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.03 MB |

JENNAIR JDPSS24 Series Dishwasher

JENNAIR JDPSG244LS Dishwasher

JENNAIR W11680101A Dishwasher

JENNAIR W11745540A Dishwasher

JENNAIR JDTS3924SP Dishwasher

JennAir Dishwasher

JENNAIR JDAF5924RX Flush Mount Panel Ready Dishwasher

JENNAIR W11680101 Dishwasher

JENNAIR JDPSS246LL Dishwasher





























