JennAir QQSCHIB Dishwasher
OPTIONS
CAN BE
SELECTED
WITH
WHAT IT DOES
ADDED TIME TO
CYCLE
ADDED
WATER
GALLONS
(LITERS)
TYPICAL
MAX
40
Raises the main wash temperature to
improve cleaning for loads containing tough,
baked-on food.
Heavy Wash Raises the main wash
Normal Wash
Sensor Wash
22
78
0 - 3.0
(0 - 11.2)
temperature from 105°F
(41°C) to 140°F (60°C).
Raises the temperature with the power of
steam before final rinse to help enhance
shine, finish and reduce glass spots.
Heavy Wash Raises main wash
Sensor Wash
Normal Wash
100
0 - 3.9
(0 - 14.9)
temperature from 105°F
(41°C) to 140°F (60°C),
steam clean before
rinsing, final rinse
temperature140°F
(60°C) to 155°F (68°C).
Sanitizes dishes and glassware in
accordance with National Sanitation
Foundation (NSF)/ANSI Standard 184 for
Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. The Sani
indicator indicates at the end of the cycle
whether the Sanitize option was successfully
completed. If the indicator does not activate,
it is probably due to the cycle being
interrupted.
Heavy Wash Increased the main
53
73
0 - 3.0
(0 - 11.2)
Normal Wash
Sensor Wash
wash temperature from
105°F (41°C) to 140°F
(60°C) and the final
rinse from 140°F (60°C)
to 155°F (68°C).
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Available
with any
cycle
Slightly faster wash for
smaller loads
-7
-30
51
0
0
Dries dishes with heat and a fan. This option
with the use of rinse aid will provide the best
drying performance. Plastic items are less
likely to deform when loaded in the top rack.
Turn Precision Dry®+ option off for an air dry.
Available
with any
cycle except
Rinse Only
Uses the heating
44
element, vents and a fan
to speed drying times.
Precision Dry®+ option
defaults to On when any
cycle is selected except
for 1 Hour Wash.
Dries dishes with heat. This option with the
use of rinse aid will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn
Precision Dry® off for an air dry.
Available
with any
cycle except
Rinse Only
Activates the heating
element at the end of the
wash cycle to speed
drying times. Precision
Dry® defaults to ON
when any cycle is
52
52
0
0
selected except for
1 Hour Wash.
Runs the dishwasher at a later time or during
off-peak electrical hours. Select a wash cycle
and options. Press 4 Hour Delay. Press
START/RESUME. Close the door firmly.
Available
with any
cycle
Delays the start of a
cycle up to 4 hours.
240
240
NOTE: Anytime the door is opened (such as,
to add a dish), the START/RESUME button
must be pressed again to resume the delay
countdown.
Control
Lock
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The Control Lock light
will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher
is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The light turns off.
NOTE: If your model requires you to press and hold 4 Hour Delay to lock the controls, the Control Locked LED will be on or off to
indicate if the Control Lock is active or not.
| General | Details |
|---|---|
| Name | JennAir QQSCHIB Dishwasher |
| Make | JENNAIR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.03 MB |

JENNAIR JDPSS24 Series Dishwasher

JENNAIR JDPSG244LS Dishwasher

JENNAIR W11680101A Dishwasher

JENNAIR W11745540A Dishwasher

JENNAIR JDTS3924SP Dishwasher

JennAir Dishwasher

JENNAIR JDAF5924RX Flush Mount Panel Ready Dishwasher

JENNAIR W11680101 Dishwasher

JENNAIR JDPSS246LL Dishwasher





























