JennAir QQSCHIB Dishwasher
Problem Solver
recommendations that may help you avoid a service call.
If you
experience
Recommended Solutions
Dishes do not dry
completely
NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous surface which tends to
collect water droplets. Towel drying may be necessary.
Use of rinse aid along with the Precision Dry® or Precision Dry®+ option is needed for proper drying.
Proper loading of items can affect drying.
■
For improved results, place items on the more slanted side of the rack.
Glasses and cups with concave bottoms hold water. This water may spill onto other items when unloading.
Unload the bottom rack first.
Check the following:
■
The Clean light is
flashing
■
Is the overfill protection float able to move up and down freely? Press down to release.
■
Be sure the water supply is turned on to the dishwasher. (This is very important following the new installation of your
dishwasher.)
■
Check for suds in the dishwasher. For more information on suds, see “Dishwasher does not clean completely.”
Spotting/Filming
NOTES:
■
Liquid rinse aid is necessary for drying and to reduce spotting.
Use the correct amount of detergent.
■
Confirm that the cloudiness is removable by soaking the item in white vinegar for 5 minutes. If the cloudiness disappears, it
is due to hard water. Adjust the amount of detergent and rinse aid (see “Dishwasher Care” section). If it does not come
clear, it is due to etching.
Be sure the incoming water temperature is set at 120°F (49°C).
Try using the Super Scrub and Sanitize options.
To remove spotting, see “Dishwasher Care” section.
Dishwasher does
not clean
Be sure the dishwasher is loaded correctly. Improper loading can greatly decrease the washing performance. (See
Operating Your Dishwasher” section.)
completely
Check filter to ensure it is properly installed. Clean it if needed. (See “Filtration System” in full User Guide for details.)
Select the proper cycle for the type of soils. The Sensor Wash or Heavy Wash cycle can be used for tougher loads.
Be sure the incoming water temperature is at least 120°F (49°C).
Use the proper amount of fresh detergent. More detergent is needed for heavier-soiled loads and hard water conditions.
Scrape food from dishes prior to loading (do not prerinse).
If foam or suds are detected by the dishwasher sensing system, the dishwasher may not operate properly or may not fill
with water.
Suds can come from:
■
Using the incorrect type of detergent, such as laundry detergent, hand soap, or dish detergent for hand washing
dishes.
■
■
Not replacing the rinse aid dispenser cap after filling (or refilling) the rinse aid.
Using an excessive amount of dishwasher detergent.
| General | Details |
|---|---|
| Name | JennAir QQSCHIB Dishwasher |
| Make | JENNAIR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.03 MB |
(1 votes, average: 5.00 out of 5)
Loading...
JENNAIR JDPSS24 Series Dishwasher
JENNAIR JDPSG244LS Dishwasher
JENNAIR W11680101A Dishwasher
JENNAIR W11745540A Dishwasher
JENNAIR JDTS3924SP Dishwasher
JennAir Dishwasher
JENNAIR JDAF5924RX Flush Mount Panel Ready Dishwasher
JENNAIR W11680101 Dishwasher
JENNAIR JDPSS246LL Dishwasher
Whirlpool WDT740SAL 4 Inch Dishwasher
Haier QDP555 Series Dishwasher
Whirlpool WDF110PAB Undercounter Dishwasher
Whirlpool W7U HS31 X Dishwasher
LG LDTS5552D PrintProof Black Dishwasher
NEFF S395HCX26G Dishwasher
Haier HDWE15-46BK6EG Dishwasher
AEG FSK53617Z Dishwasher
Bauknecht BK6UC11BS7A0X Dishwasher
IKEA MEDELSTOR Dishwasher