kleenmaid DW6020X Dishwasher
Position The Appliance
Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the right
or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling,
the height of the dishwasher may be altered by
adjusting the level of the screw in feet.
The appliance should not be inclined
more than 2°.
Fitting Between Existing Cabinets
The height of the dishwasher, 845 mm, has
been designed in order to allow the machine
to be fitted between existing cabinets of the
same height in modern fitted kitchens. The
feet can be adjusted so that the correct height
is reached.
The laminated top of the machine does not
require any particular care since it is heat,
scratch and stain resistant.
Fitting Under Existing Worktop
a
a
If the dishwasher is to be fitted under a
b
b
permanent work top remove the top cover of the
dishwasher by unscrewing the screws under the
rear edge of the top (a).
After removing the top cover, the screws MUST
BE screwed in again under the rear edge of the
top (b). The minimum height is reduced from 845
mm to 815 mm, and the dishwasher will fit under
a standard height kitchen work top.
21
| General | Details |
|---|---|
| Name | kleenmaid DW6020X Dishwasher |
| Make | kleenmaid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.05 MB |

kleenmaid DW6020XB Black /Built Under Dishwasher

Kleenmaid DW6020XB Black Built Under Dishwasher

kleenmaid DW6032 Dishwasher

KLEENmaid DW6031 Dishwasher

KLEENmaid DW4531 45cm Dishwasher

kleenmaid DW6032 Semi Integrated Dishwasher





























































