LAURUS LSVS60-9 Dishwasher
Using little detergent can result in poor
cleaning and you can see whitish streaksin
hard water.
See the detergent manufacturer’s
instructions for a further information.
you can see bluish layers
on glass and dishes.
4.12. Filling the rinse-aid and setting
To fill the rinse aid compartment, open
the rinse-aid compartment cap. Fill the
compartment with rinse aid to the MAX level
and then close the cap. Be careful not to
overfill the rinse aid compartment and wipe
up any spills.
In order to change the rinse aid level,
follow the below steps before turning on
the machine:
4.9. Filling the detergent
Push the latch to open the dispenser and
pour in the detergent.
Close the lid and press it until it locks in
place. The dispenser should be refilled just
before the start of each programme. If the
dishes are heavily soiled, place additional
detergent in the pre-wash detergent
•
Push the programme button and hold it
down.
chamber.
•
•
Turn on the machine.
Hold down the programme button until
“rA” disappears from the display. Rinse
aid setting follows water hardness
setting.
DETERGENT
•
•
•
The machine will display the current
setting.
Change the level by pushing the
programme button.
4.10. Using combined detergents
These products should be used according
to the manufacturer’s instructions.
Switch off the machine to save the
setting.
Never put combined detergents into the
interior section or the cutlery basket.
Combined detergents contain not only
the detergent but also rinse-aid, salt
replacement substances and additional
components depending on the combination.
The factory setting is “4”.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
We recommend you do not use combined
detergents in short programmes.
Please use powder detergents in such
programmes.
If you encounter problems when using
combined detergents, please contact the
detergent manufacturer.
When you stop using combined detergents,
make sure that water hardness and rinse
aid settings are set to the correct level.
Level Brightener Dose
Indicator
4.11. Rinse-aid usage
1
2
3
4
5
Rinse-aid not
dispensed
r1 is shown on the
display.
The rinse aid helps to dry the dishes without
streaks and stains. Rinse-aid is required for
stain-free utensils and clear glasses. The
rinse aid is automatically released during
the hot rinse phase. If rinse aid dosage
setting set too low, whitish stains remains
on dishes and dishes do not dry and
washed clean.
1 dose is
dispensed
r2 is shown on the
display.
2 doses are
dispensed
r3 is shown on the
display.
3 doses are
dispensed
r4 is shown on the
display.
4 doses are
dispensed
r5 is shown on the
display.
If rinse aid dosage setting set too height,
EN - 11
| General | Details |
|---|---|
| Name | LAURUS LSVS60-9 Dishwasher |
| Make | LAURUS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMS4HTW00E Dishwasher
NEFF GV 640Voll-I Dishwasher
FISHER PAYKEL DW60U4HI2 Built Under Dishwasher
GRUNDIG GNFP3440X Dishwasher
BOSCH SPI6ZDS006 Dishwasher
BOSCH SMS4ECI28E Dishwasher
GE APPLIANCES GDT665SBN Interior Dishwasher with Hidden Controls
BOSCH SMH4EVX00E 01 Integrated Dishwasher
BOSCH SMH6ZCX03E Dishwasher
EQUATOR 2240 Control Dishwasher