LAURUS LSVS60-9 Dishwasher
7.1 Changing a Programme
7.3. Switching the Machine Off
Follow the steps below to change a
programme while in operation.
"00" will be shown on the displaywhen a
programme is complete. A signal will also
sound 5 times. You can then switch your
machine off using the Power On/Off button.
Open the door and press the
Programme Selection button to
select a new programme.
Disconnect the plug and turn
off the water tap.
After closing the door, the new
programme will resume the
course of the old programme.
NOTE: If any button is not pressed
on the ready state, the machine turns off
automatically after 15 minutes.
NOTE: Open the door slightly at first to
stop a programme before it is complete in
order to avoid water spillage.
NOTE: Do not open the door before a
programme is complete.
7.2 Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
NOTE: Leave the door slightly open at
the end of a wash programme to speed up
drying.
When the door of your machine
is opened, the most recently
selected programme will show on
the display.
NOTE: If the door of the machine
is opened or the power is cut during
operation, the program will continue when
the door is closed or the power returns.
Infoled 2.1 (Model Dependent)
LED Indicator
State of the Machine
Press and hold the Programme
Selection button for 3 seconds. '1' will
be shown on the Display.
The machine is running a
program.
Red, continuous
Red, flashing
A program is cancelled.
The water discharge process will start after the
door of the machine is closed and will continue
for 30 seconds. A buzzer will sound 5 times
when a programme is cancelled.
The machine has a fault. Refer
to section "Automatic fault
warnings and what to do".
Red, flashing
rapidly
Green, continuous
A program is finished.
EN - 18
| General | Details |
|---|---|
| Name | LAURUS LSVS60-9 Dishwasher |
| Make | LAURUS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.63 MB |










































