Home > Magic Chef > Magic Chef MCSDW8TCST Dishwasher

Magic Chef MCSDW8TCST Dishwasher

ADJUSTING THE HEIGHT  
The dishwasher must be leveled and balanced after it is placed into the cabinetry enclosure. Prior to it being  
placed in the final position, the leveling legs should be at the shortest position. There are 2 sets of leveling  
legs that are included with dishwasher. Carefully measure the height of the enclosure to determine which  
legs you should use.  
NOTE: Carefully measure the height of the enclosure to make sure you are using the correct legs to assure  
that the top of the dishwasher is flush with hte bottom of the counter.  
If the height of the enclosure is 33 7/8" to 35 7/8" (860mm-910mm) use short leveling legs that come  
on the unit.  
If the height of the enclosure is above 35 7/8" (910mm) use the Long Legs included in the parts bags.  
Once inserted into the enclosure, raise the leveling feet until the top of the dishwasher is flush with the  
underside of the counter-top. Check that the unit is plumb and level and adjust the leveling feet as needed:  
1. Adjust the front legs up or down using a slotted screwdriver to raise or lower the legs.  
2. Adjust the rear legs using the Philips screw located at the bottom of the dishwasher in the center.  
Figure 3  
8
GeneralDetails
NameMagic Chef MCSDW8TCST Dishwasher
MakeMagic Chef
LanguageEnglish
FiletypePDF (Download)
File size0.97 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Magic Chef MCSCD3W Dishwasher
Magic Chef MCSCD3W Dishwasher
Magic Chef MCSCD3W 18 Inch Full Console Dishwasher
Magic Chef MCSCD3W 18 Inch Full Console Dishwasher
Magic Chef MCSCD6W3 Dishwasher
Magic Chef MCSCD6W3 Dishwasher
Magic Chef MCSCD6W3 Countertop Dishwasher
Magic Chef MCSCD6W3 Countertop Dishwasher

Magic Chef MCSDW8TCST Dishwasher