MAINSTREET 541HTDT401 Door Type Dishwasher

1

2

3

QUICK START GUIDE  

ITEM NUMBERS: 541HTDT401, 541HTDT403  

All plumbing and electrical connections must be made by a qualified installer in accordance  

with your state and local codes.  

STEP 1: LEVEL DISHWASHER  

STEP 2: HOT WATER CONNECTION  

•

The optimal water temperature is 140°F. For  

best results, the water temperature should be  

no lower than 125°F.  

•

Place dishwasher in its permanent location  

and use the leveling feet to ensure the unit is  

level and stable.  

•

Install the included 5' flexible water hose, filter,  

and gasket as shown in Fig. 1.  

FIG. 1  

To Wall:  

Straight side with  

filter 3/4" fitting  

D

To Dishwasher:  

90° side plus gasket  

For hard water supplies with a hardness of  

over 3 gpg or 5°fH and pH beyond the range of  

6.5–7.5, a water conditioner/descaler must  

be installed.  

02/2024  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	MAINSTREET 541HTDT401 Door Type Dishwasher
Make	MAINSTREET
Language	English
Filetype	PDF (Download)
File size	0.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• MAINSTREET

MAINSTREET 541HTDT401 Door Type Dishwasher Overview

Summary of Contents

• Page 1: Quick start guide Item numbers: 541HTDT401, 541HTDT403 All plumbing and electrical connections must be made by a qualified installer in accordance with your state and local codes. Step 1: Level dishwasher Step 2: Hot water connection The optimal water temperature is 140°F. For best results, the water temperature should be no lower than 125°F. Place dishwasher in its permanent location and use the leveling feet to ensure the unit is level and stable. Install the included 5' flexible water hose, filter, and gasket as shown in Fig. 1. For hard water supplies with a hardness of over 3 gpg or 5° fH and pH beyond the range of 6.5–7.5, a water conditioner/descaler must be installed.
• Page 2: Quick start guide Step 3: Drain hookup Open drain connection (1 1/2 minimum IPS). Connect dishwasher to drain using the gray flex drain. Max. drain height: 10. Do not connect drain into a disposal. Do not install P-traps on the drain hose. Do not make any drain hose loop connections. Check amps consumption on data plate to size breaker correctly. Have a qualified electrician direct connect the unit to the wall. Write the model and serial number in the manual and keep in a safe place.
• Page 3: Quick start guide Step 5: Chemicals Step 6: Preparation for use Dishwasher comes standard with built-in adjustable detergent and rinse pumps. Open door and cut tie wraps from the wash and rinse arm. Do not pull off. On the back of the dishwasher, locate clear tube marked Detergent and place inside detergent container. Verify the overflow tube is placed and secured with O-ring. The unmarked clear tube is to be placed inside your rinse container. Turn on water and verify there are no leaks. Turn on power. Use commercial-grade, high-temperature, low-suds liquid detergent and liquid rinse. The unit will begin to fill both the wash tank and booster. Run machine to verify that all electrical, water, and drain hookups are correct.