Home > MAINSTREET > MAINSTREET 541HTUC30 Undercounter Dishwasher
MAINSTREET 541HTUC30 Undercounter Dishwasher
QUICK START GUIDE
STEP 5: CHEMICALS
STEP 6: PREPARATION FOR USE
•
Dishwasher comes standard with built-in
adjustable detergent and rinse pumps.
•
Open door and CUT tie wraps from the
wash and rinse arm. DO NOT PULL OFF (Fig 7).
•
On the back of the dishwasher, locate clear
tube marked "Detergent" and place inside
detergent container (Fig. 6).
•
•
Place all filters back into the unit.
Verify the overflow tube is placed and secured
with O-ring (Fig. 8).
•
The unmarked clear tube is to be placed inside
your rinse container (Fig. 6).
•
•
•
Turn on water and verify there are no leaks.
Turn on power.
NOTE: Refer to the manual for detailed instructions
on pump adjustments.
The unit will begin to fill both the wash tank and
booster. Then, begin heating both tanks until the
wash tank is above 150°F and the booster
is above 180°F. Depending on your incoming
water, this may take up to 30 minutes to
achieve temperature.
NOTE: Use commercial-grade, high-temperature,
low-suds liquid detergent and liquid rinse.
FIG. 6
FIG. 7
FIG. 8
Run machine to verify that all electrical,
water, and drain hookups are correct,
chemical amounts are adequate, and
there are no leaks.
02/2024
| General | Details |
|---|---|
| Name | MAINSTREET 541HTUC30 Undercounter Dishwasher |
| Make | MAINSTREET |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.09 MB |

MAINSTREET 541HTDT401 Door Type Dishwasher

















