Home > Master Kitchen > Master Kitchen 340965 Drawer Dishwasher

Master Kitchen 340965 Drawer Dishwasher

Undo the plug by turning it  
anticlockwise.  
Fill the dispenser slowly to avoid  
spillage. Each dispenser will take  
300ml from empty.  
1
2
NOTE:  
It is important to clean up any spills  
rinse aid, as it will cause excessive  
foaming in the wash cycle.  
3
Close the plug by rotating it clockwise.  
Adjusting the rinse aid dispenser  
To achieve the best drying result, with the least amount of rinse aid being used, the  
dispenser can be adjusted by the user.  
There are 5 levels of adjustment, the factory setting is D5. This setting will provide  
excellent drying results.  
If the dishes are not drying properly or with cloudy stains, the setting of D4 or D5 will  
be required.  
If there are sticky whitish stains on your dishes or a bluish film on glassware or knife  
blades, the dispenser can be set back to either D2 or D1 to reduce any unnecessary  
waste of rinse aid, whilst maintaining excellent drying results.  
Follow the steps below:  
1. Switch on the dishwasher by press the Power button.  
2. Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds,  
the rinse aid indication blinks.  
3. Press the Start/Pause button to select the proper set according to your using habits,  
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.  
4. Without any operations in 5 second, or exit the set mode through the power  
button, the new setting is active.  
20  
GeneralDetails
NameMaster Kitchen 340965 Drawer Dishwasher
MakeMaster Kitchen
LanguageEnglish
FiletypePDF (Download)
File size2.46 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Master Kitchen FI60514 Dishwasher
Master Kitchen FI60514 Dishwasher

Master Kitchen 340965 Drawer Dishwasher