ORANIER GSV660 Fully Integrated Dishwasher
D
AT
9. Operation
9.1 Change programme
9.3 Switch off the machine
Follow the steps below if you want to change
programme during operation:
a
"0" is shown on the display when a programme is
complete. In addition, 5 signal tones are emitted.
Follow the steps below if you want to switch off the
appliance at the end of the programme:
► Open the appliance door.
► Press the programme selection button (2) to
select a new programme
► Press the on/off button (1).
.
2
3
1
2
3
1
► If the appliance is not to be used for a longer period of
time, unplug it and turn off the tap.
After closing the appliance door, the new programme
continues from the point at which the old programme
was interrupted.
NOTE: Do not open the door before completing
a
programme.
NOTE: Prevent water from splashing out by
opening the appliance door just a crack at first.
NOTE: After completing a programme, keep the
appliance door slightly open for faster drying.
9.2 Cancel programme
Follow the steps below if you want to cancel a
programme during operation:
NOTE: If the appliance door is opened or
a
power failure occurs, the machine will resume the
programme as soon as the door is closed again or the
power failure is over.
► Open the appliance door.
The last selected programme is shown in the display (3)
displayed
NOTE: If a power failure occurs during
drying or the appliance door is opened, the
programme will end.
► Press and hold the programme selection button (2)
for 3 seconds.
The device is then ready to select a new programme.
After these 3 seconds have elapsed, "1" appears in the
display (3).
For 3 s
2
3
1
► Close the appliance door.
Pumping starts after the appliance door is closed and
continues for 30 seconds.
A buzzer sounds 5 times when a programme is cancelled.
23
| General | Details |
|---|---|
| Name | ORANIER GSV660 Fully Integrated Dishwasher |
| Make | ORANIER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |

ORANIER GSV660 Dishwasher



















