ORANIER GSV660 Fully Integrated Dishwasher
D
AT
9. Operation
9.4 Set up Summer
9.5 Energy saving mode
Proceed as follows to change the buzzer sound level:
Proceed as follows to activate or deactivate the energy-
saving mode:
►
►
Open the appliance door.
►
►
Open the appliance door.
Press the programme selection button (2) and the
start time delay button (4) simultaneously for 3
seconds.
Press the button for start time delay (4)
and button for half charge (5) simultaneously for 3
seconds.
Simultaneo
usly for
3 s
Simultaneo
usly for
3 s
1
2
4
5
4
5
When the sound setting is recognised, a long buzzer
sounds and the display (3) shows the last set level
from "S0" to "S3".
After 3 seconds, the display (3) shows the last setting,
"IL1" or "IL0".
When the energy-saving mode is activated, "IL1" is
displayed. In this mode, the device switches off after 15
minutes of inactivity to save energy.
►
To lower the buzzer volume, press the
Programme selection button (2).
►
To increase the buzzer volume, press the
Button for start time delay (4).
When energy-saving mode is deactivated, "IL0" is
displayed. If the energy-saving mode is deactivated, the
device remains switched on unless it is switched off by
the user.
Leis
h
r
Loude
r
e
► Switch off the appliance to save the selected
setting
.
1
2
4
5
The energy-saving mode is active in the
factory setting.
►
To save the selected buzzer volume, switch off
the device.
"S0" means that there is no sound output.
9.6 Floorlight (depending on model)
The factory setting is "S3".
Floorlight
Device status
Green,
The device executes
programme.
a
permanently
illuminated
A programme was cancelled.
Green, flashing
The device is faulty.
Green, fast flashing See section "Automatic error
warnings and remedial
action".
The LED goes out
A programme has ended.
24
| General | Details |
|---|---|
| Name | ORANIER GSV660 Fully Integrated Dishwasher |
| Make | ORANIER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |

ORANIER GSV660 Dishwasher



















