ORANIER GSV660 Fully Integrated Dishwasher

1

2

3

4

5

6

D

AT  

7. load the dishwasher  

7.2 Basket loads  

Lower basket  

Upper basket  

Incorrect loads  

Incorrect loading can lead to poor washing and drying  

performance. Please follow the manufacturer's  

recommendations for good washing results.  

20  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	ORANIER GSV660 Fully Integrated Dishwasher
Make	ORANIER
Language	English
Filetype	PDF (Download)
File size	0.22 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• ORANIER

ORANIER GSV660 Fully Integrated Dishwasher Overview

Summary of Contents

• Page 1: Load the dishwasher. Basket loads. Lower basket. Upper basket. Incorrect loading can lead to poor washing and drying performance. Please follow the manufacturer's recommendations for good washing results.
• Page 2: Washing programmes Programme table Standard programme for normally soiled crockery with reduced energy and water consumption. ECO 45°C is suitable for heavily soiled tableware. Intensive 65°C is suitable for heavily soiled crockery that requires hygienic rinsing. HygienePRO 70°C is suitable for quick cleaning of normally soiled crockery. Gastro50 65°C is suitable for quick cleaning of light dirty crockery. The programme duration may vary depending on the quantity of dishes, water temperature, ambient temperature, and additional functions selected. The ECO programme is the most efficient for cleaning normally soiled dishes in terms of energy and water consumption. Washing dishes in a household dishwasher generally consumes less energy and water than washing by hand when used according to the manufacturer's instructions. Only use powder detergent for short programmes, which do not include a drying step.
• Page 3: On/off button: Switch the machine on by pressing the on/off button. Half charge button: Press the half load button to reduce the programme duration and consequently the energy and water consumption. Programme selection button: Press the programme selection button to select a suitable programme for your crockery. Display: The display alternately shows the number and the total time of the selected programme as well as the remaining operating time. Start time delay button: To delay the start time of a programme by 1 to 19 hours, press the start time delay button. Warning display Refill regenerating salt: Indicates that the salt container is empty. Warning display Top up rinse aid: Indicates that the rinse aid container is empty. Programme starts automatically: The programme starts automatically when the appliance door is closed. Changing the programme: If you decide not to start the selected programme, refer to the sections on changing or cancelling the programme. Half load display: If the Half charge option is selected, the indicator lights up.
• Page 4: Operation Change programme 0 is shown on the display when a programme is complete. In addition, 5 signal tones are emitted. Press the programme selection button to select a new programme. After closing the appliance door, the new programme continues from the point at which the old programme was interrupted. Do not open the door before completing a programme. Cancel programme If the appliance door is opened or a power failure occurs, the machine will resume the programme as soon as the door is closed again or the power failure is over. Press and hold the programme selection button for 3 seconds. A buzzer sounds 5 times when a programme is cancelled.
• Page 5: Operation Set up summer Energy saving mode Proceed to change the buzzer sound level. Open the appliance door. Press the programme selection button and the start time delay button simultaneously for 3 seconds. When the sound setting is recognized, a long buzzer sounds and the display shows the last set level from S0 to S3. When the energy-saving mode is activated, IL1 is displayed. To lower the buzzer volume, press the programme selection button. The energy-saving mode is active in the factory setting. Floorlight status indicators include green for executing a program and flashing green for a fault.