rhima RU-40 Underbench Dishwasher

1

2

3

4

5

6

7

8

DISHWASHER  

USER MANUAL  

50 HOOD  

40 & 50  

DISHWASHERS  

UNDERBENCH  

DISHWASHERS  

| 1  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	rhima RU-40 Underbench Dishwasher
Make	rhima
Language	English
Filetype	PDF (Download)
File size	0.55 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• rhima

rhima RU-40 Underbench Dishwasher Overview

Summary of Contents

• Page 1: DISHWASHER USER MANUAL HOOD DISHWASHERS UNDERBENCH DISHWASHERS
• Page 2: Instruction manual for dishwashers It is important to keep this instruction manual near the appliance for future consultation. If the appliance is sold or transferred to another user, make sure this manual remains with the appliance. These instructions are given for safety reasons and they must be read carefully before installing or using the appliance. The appliance must be connected to water and electric supply by qualified tradespersons only and according to local regulations. The appliance must be used by adults only. Do not let children play with, or operate this machine. Only persons trained to use this dishwasher are permitted to operate it. This appliance has been designed to wash food preparation and eating utensils. Do not open the appliance door or lift hood while the appliance is operating. After using the appliance, isolate the electric and water supply. Repairs and servicing of this appliance must be carried out by Rhima personnel only.
• Page 3: Instruction manual for dishwashers Read the instruction manual carefully before starting the machine. The warnings contained in the manual provide important information on safety and installation, use and maintenance. Risks and important warnings The machine must not be kept powered up when not in use or when cleaning. Never use the machine to wash objects of any form, size or material not guaranteed to be machine-washable or not in good condition. Never use the machine or any of its assemblies as steps or support for persons, property or animals. Never overload the open door of front-loading machines, which is rated only to support the basket loaded with dishes. Never use detergents or rinse additives not supplied by Rhima in this machine. If you notice any malfunction or fluid leak, immediately disconnect the power supply and shut off the water supply. Do not install the dishwasher in the vicinity of heat sources over 50ºC. Never leave the dishwasher exposed to the weather. The dishwasher may not be installed outdoors without proper cover. Do not clean the appliance with steam or water jets.
• Page 4: Instruction manual for dishwashers Using the machine Switching the dishwasher on Turn on the main electrical switch and open the external water tap. Check that there is enough detergent and rinse aid in the tanks. The machine will automatically start filling. The START button flashes. Filling the rack Wash the dishes immediately after use to prevent any residue from hardening. Use a suitable rack, fill without overloading and without overlapping the dishes. Always scrape the dishes before placing them in the dishwasher. Place the empty dishes in the rack facing downwards. Cycle selection and start-up Based on the type of dishes and their conditions, three types of cycles are available. Select the wash cycle that is suited for the dishes to be washed. To start the programme, press the START button.
• Page 5: Instruction manual for dishwashers The cycle ends with two short beeps. The START key of the selected programme returns to green and the display shows the message ‘END’. In order to get rapid drying, immediately remove the rack from the machine at the end of the cycle. Automatic cycle start-up allows the chosen cycle to start automatically when the door or hood is closed. To enable automatic cycle start-up, press and hold the START key until A appears on the display. To disable the function, press START again for five seconds with the door open or hood up. Draining the dishwasher involves moving the washing and rinsing arms, removing scrap screens, and cleaning under running water. Press the PROGRAMME SELECTION key until the display indicates (dr) to start the drain cycle. Cleaning the dishwasher at the end of the day requires removing scrap screens and tub filter, then starting the self-cleaning cycle. Ensure to replace the scrap screens and tub filter before the next use after self-cleaning. The machine will go into standby on completion of the drain or self-cleaning cycle.
• Page 6: Instruction manual for dishwashers Turning the dishwasher off Press ON/OFF to power the machine. Displaying information Hold the PROGRAMME SELECTION button to display boiler temperature, tub temperature, and number of cycles. Information is visible temporarily before and during the wash cycle. End of shift Always drain the machine at the end of the day. Disconnect the power supply and close the external water tap. Perform daily maintenance and clean the machine. Leave the door ajar or hood up to prevent bad odors. Cleaning the arms Wash and rinse arms can be removed for cleaning. Wash all parts under running water and clean nozzles thoroughly. Restore the arms and ensure they rotate freely. Never operate the dishwasher without the scrap screens/filters in place.
• Page 7: Instruction manual for dishwashers Self diagnostics The machine is equipped with a self-diagnosis system that registers and warns of a number of malfunctions. No rinsing: The rinsing cycle was not completed correctly. Make sure that the rinsing nozzles are clean. No drainage: The water was not drained or drained incorrectly. Check that the drain pipe is not bent or crushed. Rinsing temperature reset fault: The boiler temperature did not reset in the set time during the washing cycle. Water filling in tank fault: Make sure the pipes are connected correctly, and that the water tap is open. Tank thermometer fault (Probe open): The machine does not read the tank temperature value. Boiler loading time out: Boiler not filled. Impossible to carry out rinse cycle. Insufficient rinse: The right amount of rinsing did not take place; make sure the rinse nozzles are clean. Electro-mechanical safety device: The boiler or tub safety thermostats have cut in. Level safety switch: Incorrect water level in the tank. Dirty filter: Incorrect water level in tank due to dirty filter or overflow fitted incorrectly.
• Page 8: Detergents To request detergents or rinse additive contact your local Rhima Service centre. Superwash 5 Litre Part number: C23815 V Rinse 5 Litre Part number: C20135