rhima RU-40 Underbench Dishwasher
INSTRUCTION MANUAL FOR DISHWASHERS
Turning the dishwasher off
•
•
Press ON/OFF (1), on the DISPLAY (4) the central segments will light up, indicating that the
machine is powered.
Displaying information
By holding the PROGRAMME SELECTION button (2) pressed for a few seconds you can display in
sequence the Boiler temperature, the Tub temperature and the number of cycles performed by the
machine.
This information can be displayed both before and during the wash cycle and will only be visible
temporarily.
out
End of shift
IMPORTANT
•
At the end of the day always drain the machine as described in the section Machine
draining.
•
•
•
Disconnect the power supply by means of the main switch and close the external water tap.
Perform daily maintenance and clean the machine as described in the section Maintenance.
If possible, leave the door ajar or hood up to prevent bad odors building up inside the
machine.
Cleaning the arms
The wash and rinse arms are easily removed in order to clean their nozzles and prevent blockage/
encrustations.
Proceed as follows:
•
•
Remove the wash arms by unscrewing the retaining nuts or by unclipping the quick-fit attachments
on machines if equipped.
Wash all parts under a jet of running water and clean the nozzles throughly, using a toothpick or
pointed tool if necessary.
•
•
Clean the arm rotation pins inside the machine and the wash and rinse water drainage area.
Restore the arms and check that they rotate freely.
NEVER OPERATE THE DISHWASHER WITHOUT THE SCRAP SCREENS/FILTERS CORRECTLY
IN PLACE!
6 |
| General | Details |
|---|---|
| Name | rhima RU-40 Underbench Dishwasher |
| Make | rhima |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.55 MB |

rhima RU-50 Under Bench Dishwasher

rhima VU-35 Benchtop Glass or Dishwasher





















