SIEMENS SE53HS60CE Dishwasher

1

2

en  

Before using for the first time, read the instruction manual and the safety information it contains.  

Short and handy...  

Overview of water hardness settings  

Setting the water softening sys-  

tem  

Programmes  

... everything your dishwasher needs.  

You can find an overview of the  

water hardness values that can  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The runtime will change if the rinse  

aid system is switched off or rinse aid  

needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H02  

H03  

H04  

H05  

H06  

H07  

1. Press  

.

2. To open the basic settings, press  

for 3 seconds.  

a The display shows Hxx.  

a The display shows  

.

3. Press  

repeatedly until the right  

Hardness mmol/l  

range  

Setting  

value  

water hardness has been set.  

4. To save the settings, press  

for 3 seconds.  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H00  

H01  

Programme  

1) Duration [h:min]  

2) Energy [kWh]  

3) Water [l]  

1) 2:05 - 2:15  

2) 1,300 - 1,400  

3) 11,5 - 14,0  

1) 1:40 - 2:45  

2) 0,900 - 1,500  

3) 7,0 - 15,5  

1) 4:55  

Intensive 70°  

Auto 45-65°  

Eco 50°  

Adding special salt  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

2) 0,849  

3) 9,5  

1) 1:00  

2) 1,300  

Speed 65°  

Speed 45°  

Machine Care  

Favourite  

3) 10,5  

1) 0:29 ¹  

4. Place the lid back on the dispenser and turn to  

close.  

2) 0,800  

3) 10,5  

1) 2:10  

2) 1,350  

3) 15,2  

Adding rinse aid  

1) 0:15 - 0:15  

2) 0,050 - 0,050  

3) 4,0 - 4,0  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

aid  

and lift  

.

1

half standard load  

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 4 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	SIEMENS SE53HS60CE Dishwasher
Make	SIEMENS
Language	English
Filetype	PDF (Download)
File size	0.44 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• SIEMENS

SIEMENS SE53HS60CE Dishwasher Overview

Summary of Contents

• Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. You can find an overview of the water hardness values that can be selected here. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Add the detergent to the dry detergent dispenser. Load the tableware and ensure it is suitable for dishwashers. To cancel the programme, press for approx. 4 seconds.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and ensure it clicks into position. Insert the upper spray arm and screw it firmly in place. Troubleshooting E:32-00 indicates a kinked supply hose. E:92-40 indicates soiled or blocked filters. Rust spots on cutlery may occur if cutlery is not rust-resistant. Arrange tableware with sufficient space to avoid obstruction. Detergent residue may be present if the dispenser is blocked. All LEDs flashing indicates a detected fault in the electronics. Select a more intensive washing programme if the current one is too weak.