smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

Contents  

1. IMPORTANT SAFETY INSTRUCTIONS ____________________2  

2. INSTALLATION ______________________________________10  

3. PRODUCT DESCRIPTION _____________________________16  

4. OPERATING INSTRUCTIONS___________________________21  

5. CLEANING AND MAINTENANCE ________________________22  

6. TROUBLESHOOTING _________________________________23  

Thank you for choosing one of our products.  

You are advised to read this manual carefully; it contains all the  

information you need about the right conditions for the proper, safe use  

of your dishwasher.  

This manual contains only the basic information required to use the  

appliance. The complete manual can be obtained from  

www.smeg.com/download-manuals  

by entering the product code shown on the plate attached to the inner  

right hand edge of the dishwasher door.  

The manual can be accessed quickly via the QR code using a device  

with a QR reader application.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher
Make	Smeg
Language	English
Filetype	PDF (Download)
File size	0.29 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Smeg

smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher Overview

Summary of Contents

• Page 1: Important safety instructions are provided in the manual. The installation section outlines the necessary steps for proper setup. Product description includes essential features and specifications. Operating instructions detail how to effectively use the appliance. Cleaning and maintenance guidelines ensure the dishwasher remains in good condition. Troubleshooting tips help resolve common issues. Reading the manual carefully is advised for safe use. The manual contains basic information required for appliance use. A complete manual can be obtained online using the product code. Access to the manual is available via a QR code for convenience.
• Page 2: Installation Translation of the original instructions Important safety instructions Save these instructions Before using the appliance, carefully read all the instructions contained in this manual. During installation, take care not to injure yourself on the sharp edges of the appliance: wear safety gloves. This manual is an integral part of the appliance; it must always be kept intact together with the dishwasher for future reference. Use the dishwasher only for its intended function. This appliance is intended for indoor use in a household environment and similar settings. The appliance is designed and manufactured to perform the washing and drying of dishes; any other use shall be considered improper. The manufacturer declines all responsibility for uses other than those described above.
• Page 3: Installation Do not use appliances which have been damaged during transit. Do not operate your dishwasher unless all enclosure panels are properly in place. Do not tamper with controls. The appliance must be installed and connected in accordance with the instructions provided by the manufacturer. Installation must be performed by qualified technicians in accordance with applicable regulations. The installation and repair or servicing shall be carried out by qualified and authorised technical personnel. Interventions by unauthorised personnel can be dangerous and cause the warranty to lapse. The installation must comply with all the directives of the country where the dishwasher is installed. Under certain conditions, hydrogen gas might be produced in a hot-water system that has not been used for two weeks or more. Hydrogen gas is explosive.
• Page 4: Installation Flammable, do not smoke or use an open flame during this time. Never leave waste packaging unattended. Do not allow children to play with packaging materials. Separate waste packaging materials by type and consign them to the nearest recycling centre. The plate with the technical data, serial number and marking is in a visible position on the inside edge of the door. It must not be removed. The appliance must be earthed in compliance with electrical safety regulations. During the installation the appliance must be disconnected from the network. Do not install the appliance in a place subject to freezing. Do not install the appliance near equipment with high irradiation temperature. If the appliance is installed in a compartment above or below another equipment, read carefully the instructions provided by the manufacturer of the equipment.
• Page 5: Installation Building-in the appliance underneath a hob is absolutely forbidden. To ensure stability, install the appliance only under a continuous worktop, securely fixed to adjacent cabinets. If the appliance is not built-in and is accessible on one side, the door hinge area must be covered for safety reasons. Check that the voltage and the frequency of the mains match the ratings on the name plate of the appliance. The plug on the supply cord and the corresponding socket outlet must be of the same type and meet the regulations in force. Do not use adaptors or shunt connections to avoid the possibility of overheating or burning. The plug of the appliance must be accessible after installation. Never disconnect the plug by pulling on the power supply lead. If the appliance is provided with a plugless supply cord, an omnipolar circuit breaker must be installed in an easily accessible position on the supply line.
• Page 6: Installation The appliance must be connected to the water supply by means of new hoses. Briefly test the appliance after installation. Run a wash cycle with a temperature of between 113°F and 158°F (45°C-70°C) with the dishwasher empty and using a specific dishwasher detergent. If the dishwasher fails to operate correctly, disconnect it from the electrical power supply and call the nearest technical service centre. The dishwasher should only be used by adults. Use by children aged from eight years and persons with reduced physical, sensor or mental capabilities or lack of experience and knowledge is only permitted under supervision. To reduce the risk of injury, do not allow children to play in or on a dishwasher. Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children. Keep children away from the dishwasher when the door is open. Always check that the detergent distributor is empty after completion of the wash cycle. Cleaning and regular maintenance of the appliance by children is only permitted under the supervision of a person responsible for their safety.
• Page 7: Installation Some detergents are strongly alkaline. Avoid contact with the skin and eyes. Detergents can be extremely dangerous if swallowed. Observe all the safety instructions on the packaging of these products. Do not drink the water residues which may be present on the dishes or appliance at the end of the washing program. Never place solvents such as alcohol or turpentine, which are potentially explosive, inside the appliance. Never leave the dishwasher door open; people might trip over it. Do not abuse, sit on, or stand on the door or dish rack of the dishwasher. Switch off the dishwasher after use to avoid wasting electricity. Locate sharp items so that they are not likely to damage the door seal. Load sharp knives with the handles up to reduce the risk of cut-type injuries. The appliance satisfies all applicable safety regulations governing electrical equipment.
• Page 8: Installation In the event of a fault, disconnect the dishwasher from the electrical power supply and shut off the water tap. In the event of damage to the supply cord, have it replaced by the manufacturer or an authorised technical service centre. Some components are live even with the on/off button in the off position. Before performing any maintenance work on the appliance, disconnect it from the electrical power supply. Do not clean the machine with a water jet machine, high-pressure or steam cleaners. Do not introduce animals into the dishwasher. Models with “acquastop” device prevent flooding in case of water leak. When the “acquastop” device is tripped, contact a qualified technician to identify and repair the fault. In case of damage to the water intake hose, disconnect the appliance from the electrical and water supply. The device only works if the dishwasher is connected to the mains.
• Page 9: Warnings The appliance does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives. To dispose of the appliance: - Remove the washing compartment door. - Cut the power cable. - Make the lock unusable. The manufacturer declines any liability for damage or injury caused by failure to comply with the instructions indicated above or as a result of tampering with even just one part of the appliance and the use of non-original spare parts.
• Page 10: Installation Technical characteristics Water supply pressure: min. 0.05 - max. 0.9 MPa (min. 0.5 – max. 9 bar) Water supply temperature: max. 60°C-140°F Capacity: 12-13 standard place settings Class of protection against moisture: IPX0 Protection against electric shock: class I Electrical data: see the data plate Appliance dimensions: Free standing and Integrated dimensions provided.
• Page 11: Installation General information This appliance may be placed up against walls or other furniture units. If the appliance is installed near a heat source, fit a special insulating panel to prevent overheating and malfunction. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. A hole at least 8 cm (3 5/32) in diameter is required to allow the power supply cable and hoses to pass. At the end of the installation, perform a short test of the appliance: open the water tap and check that there are no leaks. To install the dishwasher against the back wall, the hoses should be passed through the lower area where there is a dedicated space for them. Level the appliance on the floor using the appropriate Allen key to regulate the adjustable feet. This operation is essential for ensuring correct operation of the dishwasher. Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.
• Page 12: Installation guidelines for dishwashers are critical for safety and functionality. Building-in a dishwasher underneath a hob is absolutely forbidden. Dishwashers must not be installed directly touching non-conventional built-in kitchen appliances. When installing a dishwasher next to other appliances, comply with the manufacturer's recommendations. For free-standing models, installing a hob on top of a dishwasher is absolutely forbidden. If the appliance is accessible from one side, the door hinge area must be covered for safety reasons. Covers for the door hinge area are available as an accessory through the Technical Assistance Service. The top surface of free-standing dishwashers can be removed for installation under a worktop. An appropriate kit for installation should be purchased from authorized dealers or via the Technical Assistance Service. Installation must be carried out by authorized personnel.
• Page 13: Installation Water supply connection Connecting to the water supply Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter supplied with the dishwasher. Screw the hose firmly into place with your hands and then complete by tightening about ¼ of a turn with pliers. In dishwashers equipped with the AQUASTOP device, the filter is already fitted inside the threaded ring. The dishwasher can also be connected to a hot water supply not exceeding 60°C (140°F). Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply.
• Page 14: Installation Drain connection Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided. Take care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. The plastic support is equipped with a hole for tying it to the wall or water tap. The free end should be positioned at a height of between 30 and 100 cm and should never be submerged in water. If a horizontal drain extension hose is used, the drain hose can be placed at a maximum height of 85 cm from the ground.
• Page 15: Installation Check that the voltage and the frequency of the mains match the ratings on the name plate of the appliance positioned on the inner edge of the door. The plug on the supply cord and the corresponding socket outlet must be of the same type and meet the regulations in force. The plug must be accessible after installation. Never disconnect the plug by pulling on the power supply lead. After changing the supply cord, make sure that the bracket which secures the cord is fixed securely in place. Do not use adaptors or shunt connections in order to avoid the possibility of overheating or burning. The power cable must be replaced by the manufacturer or by an authorized service centre.
• Page 16: Product description All the dishwasher controls are grouped on the upper panel. Switching on, programming, switching off etc. are only possible when the door is open. Symbols and styling are guideline and may vary depending on the model or version of the dishwasher purchased. Estimated wash cycle duration and time remaining. Delayed start information. Error message. Softener setting. Program cancellation.
• Page 17: User instructions Switching on Press the ON/OFF button on the top panel to switch on the dishwasher. The LED on the button and the display light up. Programming All programming operations are only possible with the door open and the dishwasher switched on. Select the wash program based on the temperatures and type of soiling stated in the program table. Starting the program Select the program required and any options, then press the start button. Close the door to start the program. The door must be closed within about 4 seconds; otherwise, the selected program light stops flashing. As the program runs, the front display will indicate the status of the cycle in progress. Warning During the initial phase of the wash program, the spray arms cannot be heard in operation because they start turning about 5 minutes after the start.
• Page 18: User instructions Programs table Soak Auto delicate mix Pots & pans ETL sanitation listed Express 27’ Crystal & china Eco express Express 60’ Sterilize If the dishwasher door is open or not properly closed, the washing cycle will not start.
• Page 19: User instructions Switching on With the door open, press the ON/OFF button on the top panel to switch on the dishwasher. The LED on the button and the display light up. IMPORTANT The door of the dishwasher must be closed within 4 seconds after use of the program selection button for all functions. If the door is not closed within 4 seconds, one or more program lights will flash at high speed to indicate that the operation must be confirmed before the door is closed. To confirm, simply press the program selection button once and the flashes will slow down; close the door once to start/restart the dishwasher. If the door of the dishwasher has not been closed or has been incorrectly closed, the washing cycle will not begin. The cycle times and electrical energy listed in the use and care manual are based on normal soil loads and 120°F (49°C) incoming water and will vary based on your actual conditions. Only “POTS & PANS” program conforms to NSF std 184 and is certified by INTERTEK with the ETL SANITATION LISTED. When the “Sani ok” appears on display it means that the dishwasher and its contents have been sanitized according to the requirements of the National Sanitation Foundation (NSF). Automatic door opening is included in programs indicated with ** in the first column.
• Page 20: User instructions Description of the programs: SOAK - Pans and dishes awaiting completion of the load. AUTO - Normally soiled dishes including dried-on residues, for daily use. DELICATE - Wash cycle for mixed loads such as wine glasses and lightly soiled dishes. MIX - Mixed dishes very dirty, including dried-on residues. POTS & PANS - Mixed dishes very dirty and pans dirty, including dried-on residues. EXPRESS 27’ - Dishes with light dirt, washed immediately after use. ECO EXPRESS - Quick wash cycle with low water and energy consumption, suitable for normally soiled mixed loads. STERILIZE - Increases the temperature of the final rinse for greater hygiene, suitable for intensive washing of plates, pots, and baby dishes. If the dishwasher door is open or not properly closed, the washing cycle will not start. Allows you to enable additional programs when selected together with any wash cycle.
• Page 21: User instructions Operating instructions After having installed the dishwasher, remove the basket retainers. Adding the salt The salt prevents the formation of scale deposits. Unscrew the cap of the salt container. Only for the first time, fill the container with a litre of water. Pour salt (approx. 1 kg) into the container using the funnel provided with the dishwasher. Only use regeneration salt specifically for domestic dishwashers. After having added the salt, run a wash cycle to remove any excess salt. Adding the rinse aid The rinse aid helps to dry the dishes more quickly. To add rinse aid, open the dispenser by pressing and lifting the tab on the cover. Top up again when the rinse aid indicator light turns on. Adding the detergent Open the detergent dispenser cover by lightly pressing the button.
• Page 22: User instructions Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or switch off the omnipolar circuit breaker. Cleaning the water intake filter Close the water supply tap, unscrew the end of the water intake hose, remove the filter and clean it under running water. Cleaning the spray arms Remove the spray arms and wash them with a jet of water. Put them back in their seats, making sure that there is nothing to prevent them from rotating. To remove the upper spray arm, unscrew the locking ring. To remove the lower spray arm, simply lift it up, pulling by the central part. Cleaning the filter unit Remove the planetarium spray arm (only for the models on which it is fitted). Grip the tabs, turn them anticlockwise and lift upwards.
• Page 23: Troubleshooting The dishwasher has an autodiagnosis system capable of detecting and indicating a preset series of possible malfunctions. Table of malfunctions detected by the autodiagnosis system includes various error codes and their descriptions. Error 01 indicates the anti-flooding system has tripped. Error 02 signifies that the water level limiting system has been tripped. Error 03 means the dishwasher is unable to heat the water. Error 04 indicates a disconnected temperature sensor. Error 05 shows that the dishwasher is unable to fill with water. Error 06 means the dishwasher cannot pump out water from the tank. Error 07 indicates an anomaly in the water distribution system. If an alarm occurs, the machine stops the current program and indicates the fault. For alarms E1 and E11, contact the technical assistance service.